GDS3710 CONFIGURATION SETTINGS
Configure SIP Account
The GDS3710 should have a valid SIP Account to interact with the GS Wave (both need to be registered
to the same SIP Server).
1. Access the GDS3710 Web GUI
2. Configure the SIP account information as detailed below.
3. Press
Note: Once the configuration is applied, the SIP Account status should be Online as displayed on the
following screenshot:
Configure Door System Settings
Once the account status is changed to Online, then we can proceed to GDS Door System settings, go to
"Door System Settings
→
•
Doorbell Mode: Set to "Call Doorbell Number": When the Doorbell button is pressed on the
GDS3710, it will initiate the call to the configured number.
→
SIP Settings
button to apply the new configuration.
Figure 2 : SIP Basic Settings
Basic Settings" then set the following:
Connecting GS Wave Android with GDS3710 Guide
→
SIP Basic Settings.
P a g e
|
5