Table of Contents
Advertisement
Connect each wire of the cable to its associate on the Back Cover of the GDS371x to power the unit using PoE.
Power the unit using PSU
To power the unit using PSU, use a multimeter to detect the polarity of your Power Supply, then connect GND to negative pole and 12V to
positive pole of the PSU.
Note
If the user doesn't have PoE switch, there is no need to connect the Blue and Brown wires to the GDS371x since these wires are used to power the
unit via Ethernet.
GETTING TO KNOW GDS371x
The GDS371x has an embedded Web server to respond to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow users to configure the
GDS371x through Microsoft Internet Explorer or Mozilla Firefox.
Download WebControl Plug-in from the GDS371x WebGUI. For Apple platform OS-X, only MJPEG video codec supported currently.
Notes
Please disable temporarily the Antivirus or Internet Security Software when download and install the Grandstream WebControl Plug-in for
Firefox/Chrome or "GSViewerX.cab" for Microsoft Internet Explorer. Please close Browser to install the downloaded Plug-in or Active-X.
Please trust and install the file downloaded if prompted by the Antivirus or Security software.
Connecting GDS371x to Network with DHCP Server
The GDS371x by default has a DHCP client enabled, it will automatically get IP address from DHCP server.
Windows Platform
Two ways exist for Windows user to get access to the GDS371x:
UPnP
By default, the GDS371x has the UPnP feature turned ON. For customers using Windows network with UPnP turned on (most SOHO routers
support UPnP), it is very easy to access the GDS371x , in this example we will take the GDS3710 as our testing unit:
1. Find the "Network" icon
2. Click the icon to get into the "Network", the GDS3710 will list as "Other Devices" shown like below. Refresh the pages if nothing displayed.
Otherwise, the UPnP may not be active in the network.
Powering the GDS371x
on the windows Desktop.
Advertisement
Table of Contents
