Restore To Factory Default Via Web Gui; Hard Factory Reset - Grandstream Networks GDS371 Series User Manual

GDS371x HTTP API
Grandstream Door System supports HTTP API (Application Programming Interface).
For more details, please refer to following guide:
https://documentation.grandstream.com/knowledge-base/gds37xx-http-api/
The document explains in detail the external HTTP-based application programming interface and parameters of functions via the supported
method. The HTTP API is firmware dependent. Please refer to the related firmware Release Note for the supported functions.
Administrator Privilege is required, and administrator authentication verification has to be executed before any operation to the related
parameter configuration.
FACTORY RESET

Restore to Factory Default via Web GUI

To perform factory reset to the GDS371x via the Web GUI, please refer to following steps:
1. Access to GDS371x Web GUI using the using the shipped default password.
2. Navigate to Maintenance ��Reboot & Reset.
3. Select the reset type from Rest drop down menu and press reset button as displayed on the following screenshot.
Note
Retaining Network Data and Card Information or Only Crad information options are available only on the GDS3710 Model.

Hard Factory Reset

Note
Resetting the device on the Wiegand interface cable is supported only on the GDS3710 Model.
Some users did not keep the revised password safely and forgot the changed password. Due to GDS3710 did NOT have built-in reset button
(Grandstream purposely designed this way to enhance security), this will make the GDS3710 inaccessible even for the true owner who lost the
changed password.
Starting from firmware 1.0.2.21, Grandstream introduced a special way to do hard factory reset using the Wiegand Interface Cable shipped with
GDS3710. Below is a photo of the normal connection of the provided Wiegand cable.
Important Note
Power must NOT be lost while performing hard factory reset.
Reset via Web GUI