Maintenance Settings - Grandstream Networks GDS371 Series User Manual

Central Storage will use GDS Manager built-in FTP server to store screenshots.
FTP Filenames
When setting up FTP server to store snapshots (when doorbell pressed, or door Unlocked), the GDS will create folder with device MAC address (if
multiple GDS3710/GDS3712s are sending snapshots to same FTP server).
In EACH folder based on MAC address or device, the file folder will be created by DATE, to organize and classify the snapshots received during
different DATE for easy analysis.
In EACH folder classified with DATE, the snapshot file name is based on following naming schema:
FTP Filename
Description
with
CARD Meaning that open door operation is using RFID card.
LPIN (Local
Meaning that open door operation is via Local PIN (Private PIN, or Unified PIN, or Guest PIN).
PIN)
RPIN Meaning that open door operation is via remote PIN or DTMF PIN. (by local or remote SIP extensions, or GS_Wave/Cellphone,
(Remote PIN) or GDSManager if installed in operation).
RING Meaning the snapshot taken when somebody pressed the Door Bell button.
The following figure illustrates the FTP filenames sent to the FTP server when the above operations have been taken:

Maintenance Settings

This page shows the GDS371x Maintenance parameters.
Upgrade
This page contains the upgrade and provisioning parameters of the GDS371x.
Table 34: FTP Filenames
Figure 101 : FTP filenames