Table of Contents
Advertisement
Valid End
Configures the End date of validity of the RFID card.
Date
Virtual
When dialing directly from the keypad, the GDS accept only Virtual number to identify a user, once the Virtual number is typed
Number
followed by # key, the SIP Number will be dialed.
Configures the SIP Number which is mapped with virtual number. Once the virtual number is dialed the GDS3710 will send an
SIP
INVITE to the SIP Number.
Number
Note: The SIP Number can be configured with an extension/phone number or IP address. Example: 192.168.5.124
Call Out
Select the Account from which the GDS3710 will call the User SIP Number when dialing from the keypad. Default is Auto.
Account
Cellphon
Configures cellphone of the user.
e
Group
Specifies to which group the user will be added.
Schedule
Specifies the schedule that will be assigned to the user.
Right of
Card
Select the doors that can be accessed by user.
and
Private
PIN
When checked, the user's RFID and Private PIN will be active for door opening. If unchecked, the Private PIN nor RFID card swipe
Enable
won't take effect.
Notes
– Group overrides Schedule.
– If Schedule is set as "Disabled" the RFID Card will be accepted when swiped All Day.
– If user disabled, the related Card or PIN will fail to Open Door.
– Private PIN Open Door will not work if "Private PIN" is blank.
Add Users Automatically
If [Enable Card Issuing Mode] is checked, the GDS3710 keypad will start blinking and once an RFID card is swiped, data stored on the card will be
added into the GDS3710 card management page, user can still edit the entry added automatically by modifying some fields.
Users Operation
Click on
to edit the entry or show details of the entry.
Select the entries and click on
Click
to refresh the data entered to the GDS3710.
Users can use
Show private PIN
The private PIN can be displayed easily from the card management page using the eye icon.
Table 9: Card Info
to delete the selected users.
to navigate through User Management pages.
Advertisement
Table of Contents
