Table of Contents
Advertisement
Enable Motion Detection
Region Config
Quit Editing
Clear Selected Region
Sensitivity
Select Alarm Schedule
Select Alarm Action Profile
Digital Input
Selects the Input method (alarm Input or Door Open).
Default disabled.
Digital Input Port operates in 3 Modes:
1. Alarm Input: Connect sensor to trigger alarm.
2. Open door: Connect a switch to open door from inside.
Digit Input 1
3. Abnormal Door Control: This is a major security enhancement for GDS37xx when device be tampered to
Please check Siren alarming when door opened abnormally section.
If Digital Input port is connected to a switch, it will not work during the time of power outage, device booting or
firmware upgrading.
Figure 92: Region Config
Enables the motion detection feature.
Configures the motion detection region.
Exits the motion detection region config menu.
Selects a zone on the screen then click on "Clear" to delete the region.
Specifies the region sensitivity (value between 0-100%).
Selects the alarm schedule.
Selects the programmed Alarm Action profile.
Table 22: Motion Detection
Figure 93: Digital Input
open the door abnormally.
Advertisement
Table of Contents
