Osd Settings; Cmos Settings - Grandstream Networks GDS371 Series User Manual

To retrieve MJPEG video stream via http, users can use the following format:
http(s)://admin:password@IP:port/jpeg/stream=X (X=Stream channel 0,1,2)
Important Note
MJPEG is uncompressed video and it can consume a lot of bandwidth and hardware resources, it is recommended to use it while taking this into
consideration that it might slow down network and device.

OSD Settings

OSD Settings (On Screen Display) allows the users to Display time stamp and text on the video screen.
Display Time
Display Text
OSD Date Format
OSD Time Format
OSD Text
OSD Date/Time Position
OSD Text Position

CMOS Settings

This page configures the CMOS parameters for different scenarios.
Mode
Figure 87: OSD Settings Page
When checked, time will be displayed inside the video image.
When checked, inputted text on "OSD Test" will be displayed on the video image.
OSD Date format, choose based on user preference.
OSD Time format, choose based on user preference.
Input a text (to identify the GDS3710) it will be shown on the screen. Maximum length is 32.
Show the Date/Time position on the screen.
Show the text position on the screen.
OSD Settings
Figure 88: CMOS Settings Page
Pull down to choose "Normal, Low Light, WDR" for different light condition. Default "Normal".