Table of Contents
Advertisement
Chapter 1: Overview
Table 8. GS980MX/10HSm Twisted Pair Ports 1-8 LED Functions (Continued)
LED
PoE
36
Ports
State
Solid Green
Solid Amber
Flashing
Amber
1-8
Off
GS980MX/18HSm
The LEDs indicate Link/Activity (L/A) and PoE (PD ON/PD ERR/MAX
CURRENT) information. These LEDs are shown in Figure 13.
Figure 13. GS980MX/18HSm Twisted Pair Ports
Description
PD On - The switch is delivering power to a
powered device connected to the port.
PD Error - The switch has shut down PoE on the
port because of a fault condition.
PD Max Current - The switch has detected a
powered device on the port but is not delivering
power to it because doing so would exceed its
available power budget.
No PD - This LED state can result from the following
conditions:
- The port is not connected to a powered device or
the device is powered off.
- The port is disabled in the management software.
- PoE is disabled on the port.
- The LEDs are turned off. To turn on the LEDs, use
the eco-friendly button.
L/A LED
PoE LED
7
9
11
13
8
10
12
14
15
17
16
18
Advertisement
Table of Contents
