Chapter 7: Building The Trunk With The Default 10Gbps Stacking Ports - Allied Telesis AlliedWare Plus GS980MX Series Installation Manual

Chapter 7
Building the Trunk with the Default
10Gbps Stacking Ports
This chapter contains the following procedures:
"Introduction" on page 142

"Installing the Power Cord Retaining Clip" on page 143

"Powering On the Switches Individually" on page 144

"Powering On the Switches Simultaneously" on page 148

"Starting a Local Management Session" on page 150

"Verifying the Stack" on page 153

"Adding Ports 25 and 26 on GS980MX/28 or GS980MX/28PSm

Switches to the Stack Trunk" on page 154
"Adding Ports 49 and 50 on GS980MX/52 or GS980MX/52PSm

Switches to the Stack Trunk" on page 156
"Monitoring the Initialization Processes" on page 158

141