Commissioning; Checking Before Power-On; Configuring The Safety Standard - Alpha ESS SMILE-S6 Series Installation Manual

zz

9. Commissioning

9.1 Checking Before Power-On

No. Check Item
1 Mounting environment
Battery pack and
2
inverter mounting
3 WiFi mounting
4 Cable layout
5 Cable tie
6 Grounding
Switches and breakers
7
status
8 Cable connections
9 Unused cable glands
9.2

Configuring the safety standard

Please set the safety standard appropriate for your country or purpose via APP or Web
during pilot run;
The safety standard must be set correctly
If you select a safety standard which is not valid for your country and purpose, it can
cause a disturbance in the energy storage system and lead to problems with the grid
operator. When selecting the safety standard, you must always observe the locally
applicable standards and directives as well as the properties of the PV system (e.g.
PV system size, grid-connection point).
• If you are not sure which safety standard is valid for your country or purpose, con-
tact your grid operator for information on which safety standard is to be configured.
___________________________________________________________________
Acceptance Criteria
The mounting space is proper, and the mounting
environment is clean and tidy, without foreign object.
SMILE-S5 and expansion battery packs are
mounted correctly, securely, and reliably.
The WiFi module is mounted correctly, securely, and
reliably
Cables are routed properly as required by the
customer.
Cable ties are secured evenly and no burr exists.
The ground cable is connected correctly, securely,
and reliably.
The battery switches and all the breakers connect-
ing to the product are OFF.
The AC cable, battery cable, and communication ca-
bles are connected correctly, securely, and reliably.
Unused cable glands are blocked by rubber sealings
which are secured by pressure caps.
Alpha ESS Co., Ltd.
Your Smart Energy
Page 59 of 74