Alpha ESS SMILE-S6 Series Installation Manual page 39

zz
3. Dismantle the AC cable by 80 mm, and strip the insulation of L, N and PE conduc-
tors by 10 mm.
4. Insert the stripped part of the conductors into the cord end terminals and crimp
them by using a crimping tool.
5. Use the #2 screw driver to tighten the screws with the cable.
6. Place the AC connection cover against the inverter and tighten it.
7. Fix the AC power cable as the picture shown below.
___________________________________________________________________
AC Connection Cover
Alpha ESS Co., Ltd.
Your Smart Energy
Page 39 of 74