Alpha ESS SMILE-S6 Series Installation Manual page 51

zz
4. Connect the BMS communication cables from battery 2 to battery 1.
Battery 1
Battery 2
5. Assemble front cover and side cover of the expanded battery with 3 M4 flange
nuts (tools: SW7 sleeve or other tools for M4 flange, torque: 1.6 Nm).
6. Attach the cover to the battery pack.
Fasten the cover on the battery with screws in sequence 1-7 and screw M5*12
(X4) (tool: T20 screwdriver, torque: 2.5 Nm).
NOTE:
Seven screws should be pre-locked and then fastened together at the end.
___________________________________________________________________
Alpha ESS Co., Ltd.
Your Smart Energy
Page 51 of 74