Alpha ESS SMILE-S6 Series Installation Manual page 30

Your Smart Energy
7. Hold the handles on both sides of the battery pack and install the battery pack on
the wall bracket(从侧边平推). This step should take two people to complete.
8. Tighten the wall bracket and the battery pack with screw M6*16 (X4) (tool: T20
screwdriver, torque: 3.0 Nm).
9. Remove the rubber plugs from the battery, and then remove the front cover after
unscrewing screws with T20 screwdriver.
___________________________________________________________________
Page 30 of 74
Alpha ESS Co., Ltd.