Symbols On The Label - Alpha ESS SMILE-S6 Series Installation Manual

zz

Symbols on the Label

2.4
Symbols on the type label of the inverter
Symbol
___________________________________________________________________
Explanation
Beware of a danger zone
This symbol indicates that the product must be additionally
grounded if additional grounding or equipotential bonding is
required at the installation site.
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Danger to life due to high voltages in the inverter, observe a
waiting time of 5 minutes.
High voltages that can cause lethal electric shocks are pre-
sent in the live components of the inverter.
Prior to performing any work on the inverter, disconnect it
from all voltage sources as described in this document.
WEEE designation
Do not dispose of the product together with the household
waste but in accordance with the disposal regulations for
electronic waste applicable at the installation site.
Observe the documentation
Certified safety
The product is TUV-tested and complies with the require-
ments of the EU Equipment and Product Safety Act.
CE marking
The product complies with the requirements of the applicable
EU directives.
RCM (Regulatory Compliance Mark)
The product complies with the requirements of the applicable
Australian standards.
Alpha ESS Co., Ltd.
Your Smart Energy
Page 13 of 74