Transducer Element Test - GE Vscan Air Manual

Vscan Air Maintenance

Transducer Element test

NOTE:
6-42
The transducer element test transmits/receives on each element
to determine if the element working as intended. If the Element
test fails, the failing element(s) are reported in the system logfile.
The transducer element test is part of the probe diagnostics test
which is found via the app Menu -> Diagnostics -> Run
Diagnostics.
The element test is then executed as part of a predefined test
list of diagnostic tests.
If diagnostics fails, GEHC service will have to look through the
logfile to determine which test failed. If the transducer element
test failed, service will then be able to identify the failing
transducer element(s) and guide on further actions needed.
–
Vscan Air
Direction GP092020-1EN Rev 18
User Manual