GE Vscan Air Manual page 251

Assign Patient data from Modality Worklist Server to the current exam
NOTE:
–
Vscan Air User Manual
Direction GP092020-1EN Rev 18
Vscan Air can download and refresh a DICOM modality worklist.
An exam can be linked to an existing patient pulled from the
worklist, prior to exporting to the DICOM image server.
To assign Patient data from a modality worklist server to the
current exam in the Vscan Air application, follow the procedure
below.
1. Swipe from right to left.
OR
Press Patient icon on the top right corner.
Figure 5-31. Patient Icon
Patient data can be assigned to an individual exam only.
The Patient data cannot be assigned to more than one
exam simultaneously.
Scanning
5-39