GE Vscan Air Manual page 171

Configure Modality Worklist Server (continued)
–
Vscan Air User Manual
Direction GP092020-1EN Rev 18
5. Once the Modality Worklist Server is added, the server
name will be available under Server Settings. If this is the
first Modality Worklist (MWL) server that is added, it will be
set as the favourite server by default. If there are more than
one MWL/Radiology Information System (RIS) server then
one of them has to be chosen as a favorite server. To select
a MWL server as a favorite, tap on the respective star mark
and press YES on the pop-up message screen.
Figure 4-20. Worklist server as Favourite
Configuration
4-19