Scanning; General Scanning Recommendations - GE Vscan Air Manual

Using Vscan Air CL

General scanning recommendations

Before each use:
After Each Use
WARNING
Use of Gel
CAUTION
5-4
Inspect the Vscan Air CL probe (see 'Inspection' on page 6-3).
• Inspect the Vscan Air CL (see 'Inspection' on page 6-3 )
• Clean the Vscan Air CL (see 'Cleaning and disinfection' on
page 6-6).
• If required, disinfect the Vscan Air CL (see 'Cleaning and
disinfection' on page 6-6 ).
Ensure that the Vscan Air CL is properly cleaned and disinfected
after each use and before storing in the protective case.
If any damage is found on the Vscan Air CL, do not use it.
Contact GEHC service.
In order to ensure optimal transmission of energy from the
transducer to the patient, a conductive gel must be applied on
the transducer lens.
If the gel comes in contact with the eye, consult the gel
manufacturer's instructions.

Scanning

–
Vscan Air
Direction GP092020-1EN Rev 18
User Manual