Assessing Display Device Wi-Fi Performance With Vscan Air Probe - GE Vscan Air Manual

Using Vscan Air CL

Assessing Display Device Wi-Fi Performance with Vscan Air probe

Step Step name
1 Configure app settings
2 Connect probe and app
3 Select preset with color
4 Confirm/Verify
5 Review cine
6 Confirm/Verify
5-86
Prior to setting up for a guided procedure, it is recommended to
check if the display device being planned for use during the
procedure supports a stable connection with the Vscan Air
probe, by following the below steps.
Set the Video duration to 1 second from Menu -> Configuration.
This will help to visualize discontinuities in loop playback which
indicate lost frames.
Connect the probe with the app
Select Small Parts from the Shallow (Linear) presets menu.
Enter color flow mode by pressing the ROI button. Adjust the
color gain to 100% to visualize noise inside the color ROI.
Observe the noise pattern inside the color ROI. The randomness
of the pattern should not appear to pause occasionally.
Press freeze. Then press the Play button to the left of the scroll
bar.
Observe the blue cine position indicator as it moves from left to
right along the position indicator. It should move in a consistent
fashion from left to right (the distance it moves with each
increment appears equal).
If the display device does not pass the above criteria
successfully, using an alternate display device is recommended
for supporting guided procedures.
Description
–
Vscan Air
Direction GP092020-1EN Rev 18
User Manual