GE Vscan Air Manual page 327

Inspection
Inspecting the Vscan Air
CAUTION
WARNING
Before each use
–
Vscan Air User Manual
Direction GP092020-1EN Rev 18
If any defects or damages are found on the Vscan Air CL
probe, do not use it. Contact GEHC.
Examine the following on a monthly basis (or whenever there is
a reason to assume that any issue may have occurred):
• Equipment for cracks, loose or missing hardware.
To avoid electrical shock hazard, do not remove covers from
the Vscan Air CL.
1. Inspect the lens and the probe housing.
2. Look for damage that might allow liquid into the probe.
3. Test the functionality of the probe.
System care and maintenance
6-3