GE Vscan Air Manual page 159

Configuration (continued)
NOTE:
–
Vscan Air User Manual
Direction GP092020-1EN Rev 18
5. Auto Freeze Time (see 'Configuration' on page 4-3) -
• Press Auto Freeze Time
• Tap on the desired value to set the auto freeze time.
This sets the time after which the system enters Freeze
mode when not in use.
Figure 4-6. Auto freeze time
Configure the display device with an adequate
'screen-save' timeout and 'auto freeze' timeout in the
case of performing guidance procedures where there is
no user interface interaction over the course of the
procedure.
Configuration
4-7