GE Vscan Air Manual page 249

Assign Patient data manually to an existing Exam (continued)
NOTE:
–
Vscan Air User Manual
Direction GP092020-1EN Rev 18
3. Press "Edit Patient" button at top right corner and enter the
required information in the respective fields under "New
Patient" screen.
Press "Add" button to assign Patient data to the existing
exam. After successful assignment of Patient data,
application takes you to the scan screen.
Once the Patient data is assigned to an exam, you can not
re-assign or alter the patient details in that exam.
Figure 5-29. Edit Exam
Scanning
5-37