GE Vscan Air Manual page 88

Preparing Vscan Air CL for Use
Vscan Air CL LED indication
Vscan Air CL is ON
1. Powering up
2. Booting
3. Searching
4. Display found
Figure 3-9. LED states when Vscan Air CL is ON
3-20
To turn ON the Vscan Air CL, press and hold the power button
for 1 second.
To turn OFF the Vscan Air CL, press and hold the power button
for 3 seconds.
5. Connected
6. Active array
7. Powering OFF/Occupied
8. Error
- A blinking white light switching between Vscan Air CL ends
indicates that the Vscan Air CL is ON and booting.
- A blinking white light on both LEDs indicates the Vscan Air
CL is ON and searching for Vscan Air App.
- A steady white light on both LEDs indicates that the Vscan
Air CL is ON and a display device with the Vscan Air App is
found.
- A steady blue light on both LEDs indicates that the Vscan Air
CL is ON and connected.
- A steady blue LED on one Vscan Air CL side indicates which
transducer is active and selected. Vscan Air CL is powered ON.
- A steady purple light on both LEDs indicates the Vscan Air
CL is ON, is occupied and shall not be interrupted. E.g. when
running test or upgrading software.
- A steady red on both LEDs indicates the Vscan Air CL is ON
and an error has been detected.
–
Vscan Air
Direction GP092020-1EN Rev 18
User Manual