Table of Contents
Advertisement
Specifications - JH 20T03 MMD (DVI)
T E C H N I C A L D E S C R I P T I O N
TFT Technology:
• 20.1 inch viewable image size
• Active Matrix
• Thin Film Transistor (Super-TFT)
TFT Characteristics:
• Pixel Number
: 1280 x 1024
• Pixel Pitch (RGB)
: 0.312 (H) x 0.312 (V) mm
• Response Time
: 25 ms (typical), "black" to "white"
• Contrast Ratio
: 300:1 (typical)
• Light Intensity
: 250 cd/m2 (typical)
• Viewable Angle
: +/- 85 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 399.36 (H) x 319.49 (V) mm
• Max Colors
: 16.7 millions (depending on graphics card)
Synchronisation:
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> SXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal
: 31,5 kHz to 91,1 kHz
• Vertical
: 60 Hz * to 85 Hz
* Recommended for optimum picture quality
Supported Signal Inputs:
Resolutions:
• VGA
: 640 x 480 (including 640 x 350)
• SVGA
: 800 x 600 (including 720 x 400)
• XGA
: 1024 x 768
• SXGA
: 1280 x 1024 *
Video Signals:
• Interlaced NTSC and PAL/SECAM video
• Composite video
• S-Video
* Recommended for optimum picture quality
Power Specifications:
Power Supply Options:
• 115 & 230VAC - 50 / 60Hz
• 24 VDC
Power Consumption:
• Operating
Compass Safe Distance:
JH 20T03 MMD-A1
This product have been tested / type approved by the following classification societies:
EN60945 3 rd (IEC945 3 rd )
ABS - American Bureau of Shipping
BV - Bureau Veritas
EN61174 (IEC1174) - Bundesamt für Seeschiffahrt und Hydrographie (BSH)
IND100129-5
: Model JH 20T03 MMD A1
: Model JH 20T03 MMD A2
: 100 W (max)
Standard: 200cm
A P P R O V A L S
LRS - Lloyd's Register of Shipping
GL - Germanischer Lloyd
RS - Russian Maritime Register of Shipping
Note: All specifications are subject to change without prior notice!
M E C H A N I C A L D E S C R I P T I O N
Physical Dimensions:
• 534 (W), 481 (H), 79.50 (D) mm
• Weight: 14 kg (approx w/bracket)
Input Signal Terminal:
• DVI-D (PC) signal : DVI-D Input 24pin Connector
• RGB (PC) signal
: 15pin mini D-SUB (female - Input)
• Composite Video
: RCA Phono plug
• S-Video signal
: S-Video (SVHS) plug
• AC Power signal
: Std IEC Inlet
• DC Power signal
: Screw terminal Model JH 20T03 MMD A2
Accessories:
• Touchscreen
: 1 x D-SUB 9P Connector (female)
• Remote Control
: 2 x D-SUB 9P Connectors (female)
User Controls:
On front bezel:
• Power On/Off (push button)
• Brightness Control
• 2 x hotkeys
• Mode Status LED
Behind hatch:
• On Screen Display control (OSD/OSM)
Environmental Considerations:
• Operating
• Storage
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Options:
• JH MMD BR
= Bracket *
• JH MMDRO
= Rotary Bracket *
• JH 20TSV
= Sun Visor *
• JH VESA 20T03 = Vesa Bracket *
• JH VBUF
= Video Buffer (1)
• JH SCOM
= Remote Control
• JH XPR = External Power Relay
• ECDIS Version = JH 20T03 MMD E1
• Touch Screen
= Factory mounted
*Option: Standard or custom logo and color
*Option: See separate datasheet for specifications on bracket options.
(1) The JHVBUF is tested at resolutions up to 1600 x 1200. Both separate sync and
composite sync is supported. The VGA output signal is at same resolution and sync as
the input. The output is working even if the main display is turned off. (Power supply
must be connected though)
Steering: 135cm
& C E R T I F I C A T E S
ClassNK - Nippon Kaiji Kyokai
DNV - Det Norske Veritas
EN60529 (IP66) (Applies only for flush mounting)
0
INB100005-1 (Rev 19)
Model JH 20T03 MMD A1
: Temperature -15 deg. C to +55 deg. C
Humidity 30% to 90% (non condensing)
: Temperature -20 deg. C to +60 deg. C
Humidity 10% to 90% (non condensing)
Advertisement
Table of Contents
