Table of Contents
Advertisement
Quick Links
U S E R M A N U A L
Series X - Standard Display (STD) Models
HD 08T21 STD-xxx-Fxxx - 8.0 inch Standard Display
HD 13T21 STD-xxx-Fxxx - 13.3 inch Standard Display
User Manual STD Series X Compact
Updated: 26 Aug 2015
Doc Id: INB100535-2 (Rev 10)
Created: 363
Approved: 6987/6784
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
Advertisement
Table of Contents
Related Manuals for Hatteland HD 08T21 STD-***-F SERIES
Summary of Contents for Hatteland HD 08T21 STD-***-F SERIES
- Page 1 Updated: 26 Aug 2015 Doc Id: INB100535-2 (Rev 10) Created: 363 Approved: 6987/6784 Please visit www.hatteland-display.com for the latest electronic version of this manual. Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com...
- Page 2 Copyright © 2015 Hatteland Display AS Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Display AS.
-
Page 3: Table Of Contents
Contents Contents ..................3 Contents of package ....................5 General .................... 7 About this manual ......................8 About Hatteland Display ....................8 www.hatteland-display.com ..................8 Contact Information ......................8 Standard Display (STD) - Introduction .................9 Product Labeling ......................10 Product Labeling ......................12 Warranty Label ..................... 12 Quality Control (QC) Label ................... - Page 4 Contents Technical Drawings ..............35 Technical Drawings - HD 08T21 STD-xxx-Fxxx ............36 Technical Drawings - HD 13T21 STD-xxx-Fxxx ............37 Appendixes ................... 39 Pinout Assignments ....................40 Basic Trouble-shooting ....................41 Declaration of Conformity ...................42 Return Of Goods Information ..................43 General Terms and Conditions ...................44 Pixel Defect Policy .....................45 Notes ..........................46 Revision History ......................48...
-
Page 5: Contents Of Package
Documentation and Driver DVD/CD containing the user manual, including the Touch Screen driver for units delivered with a factory mounted touch screen. For most recent drivers, please Menu browser visit “www.hatteland-display.com/archive” for Microsoft® Windows® In some cases (due to revisions) a provisonal CD (PRO02-xxx) may be delivered with the unit Operating Systems instead. - Page 6 This page left intentionally blank...
-
Page 7: General
General... -
Page 8: About This Manual
About Hatteland Display Hatteland Display is the leading technology provider of specialized display and computer products, delivering high quality, unique and customized solutions to the international maritime, naval and industrial markets. -
Page 9: Standard Display (Std) - Introduction
Projected Capacitive Touch Screen (Multitouch, USB interface) as standard. Series X displays feature HATTELAND® Glass Display Control™, LED backlight technology* and full dimming as standard, and can also accomodate and combine a number of options such as optical bonding and sunlight readability** * 13 inch units has traditional CCFL backlight. -
Page 10: Product Labeling
This section details the locations, content details and specifications for factory mounted labels for all currently available standard Hatteland Display Standard Industrial Display (STD) models. This information will in most cases also apply for most Customized Models as well, but may differ based on customer requirements, in that case, please refer to the customized User Manual (paper or electronic version, dependent on customer requirements). - Page 11 Product Labeling Label Locations Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below is seen from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation vs product size is drawn in.
-
Page 12: Product Labeling
IND100780-3 - Rev 07 - 03 Aug 2015 Serial Number Label Layout (example) This document explains the type number structure for the Hatteland Display Series X Maritime Multi Display product range. - Example standard typenumber: HD 19T21 MMD-MA1-FAGA Manufacturer and Country... -
Page 13: Touch Screen Products
- Communicates via USB to external computer or internally Main usability, performance and integration characteristics are: Technology Optical Performance Stable Calibration Gloves Water Durability Price Multitouch Frameless Design Analog Resisitive Surface Capacitive Projected Capacitive* *Used for all Hatteland Display standard Series X Touch Screen products. Touchscreen IND100110-12... -
Page 14: Touch Screen Drivers And Documentation
“Multitouch”. You may choose to install 3rd party drivers for example during trouble-shooting situations or to review features of the 3rd party software. Hatteland Display suggests that you should use factory default Microsoft® Windows® 7 HID touch drivers in any case possible. -
Page 15: Installation
Installation... -
Page 16: General Installation Recommendations
General Installation Recommendations First Things First! ATTENTION! IND100148-5 - Rev 03 To prevent damage to chassis and glass, please review the illustrations below before handling units. WRONG CORRECT Humidity Exposure Notice! HANDLING ! HANDLING ! Applies for non-bonded product only. If exposed to humidity in combination with temperature variations,... -
Page 17: Installation Limitations
General Installation Recommendations 7. If the push buttons of the product are not illuminated, an external, dimmable illumination (IEC 60945 Ed. 4, 4.2.2.3, e.g. Goose neck light) is required for navigational use. The illumination shall be dazzle-free and adjustable to extinction. -
Page 18: General Mounting Instructions
9. The classification is only valid for approved mounting brackets provided by Hatteland Display. The unit shall be mounted stand-alone without any devices or loose parts placed at or nearby the unit. Any other type of mounting might require test and re-classification. -
Page 19: Ergonomics
General Installation Recommendations Ergonomics 1. The front surface of the display glass has an anti-reflective (AR) coating which can be scratched and damaged with improper cleaning. It is recommended to use only 90+% pure Isopropyl alcohol (Isopropanol) and a soft fabric cloth for this first cleaning. -
Page 20: Maximum Cable Length
General Installation Recommendations Maximum Cable Length Any cable should generally be kept as short as possible to provide a high quality input/output. The maximum signal cable length will depend on the signal resolution and frequency, but also on the quality of the signal output from the computer/radar. -
Page 21: Housing / Terminal Block Connector Overview
Connector used for module 2-pin Phoenix 1961986 • DC Power IN (24VDC) - Single Input MSTB 2,5/ 2-STF-5,08 BK Identifi ed on Hatteland Display product data sheet as: “Terminal Block 5.08” Screwdriver: SZS 0,6x3,5, slot- headed. Tightening torque min. 0.5 Nm. - Page 22 General Installation Recommendations If your installation require additional cable fasteners support, please visit and purchase directly from manufacturer: Illustrations below are approximate, actual Housing and Hood may deviate slightly, but function remains the same. Phoenix Cable Housing - Illustration Weidmüller Cover Hood - Illustration Weidmüller 1005290000 - BCZ 3.81 AH04 BK BX (4-pin) Phoenix 1803934 - KGG-MSTB 2,5/ 2 (2-pin) Weidmüller 1005300000 - BCZ 3.81 AH05 BK BX (5-pin)
-
Page 23: Physical Connections
Physical Connections Terminal Label Markings of 8 inch unit Connection area of 8 inch unit DVI-I In Grounding Screw 2 x DC Power Inputs USB Touch IND100133-50... -
Page 24: Terminal Label Markings Of 13 Inch Unit
Physical Connections Terminal Label Markings of 13 inch unit Connection area of 13 inch unit DVI-I In Grounding Screw USB Touch 2 x DC Power Inputs IND100133-50... -
Page 25: Power Inputs
Physical Connections USB TOUCH: Connect a TYPE B USB Cable between this connector and your PC. Suitable drivers to install and calibrate the touchscreen are available on the separate installation media delivered with the unit. Port is USB2.0 (<5m). DVI-I IN: Connect your DVI cable to the DVI-I 29P Connector (female). - Page 26 This page left intentionally blank...
-
Page 27: Operation
Operation... -
Page 28: User Controls
Used to sense level of ambient light in the surrounding environment. The sensor data can be read by suitable software through the Hatteland Display SCOM functionality of the unit and thus can be used to control brightness remotely. Note: This sensor is barely visible for the eye and has no illumination behind to indicate it’s position. Further, by touching or covering this area will naturally make the sensor data inaccurate. - Page 29 + 0x02 Increase Brilliance / Brightness was detected For installation, implementation, usage and example code, review the document via our website: http://www.hatteland-display.com/pdf/misc/doc101699-1_touch_keypad_access.pdf and download the drivers package from (includes .dll and demo executable): http://www.hatteland-display.com/drivers/touch_keypad_package.zip or download the entire drivers package for MMC units: http://www.hatteland-display.com/support_hardware_drivers_panel_computers_seriesx.php...
- Page 30 (contents of package). Due to revisions made to the DVD, the document is not available on revisions prior to “STD01-007 - August 2013”. In any case, we have also provided the same document for download through our website: http://www.hatteland-display.com/pdf/misc/doc101681-1_8_and_13inch_dis_ddc_control.pdf Operation IND100064-43...
-
Page 31: Specifications
Specifications... -
Page 32: Specifications - Hd 08T21 Std-Xxx-Fxxx
Specifications - HD 08T21 STD-xxx-Fxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. TFT Technology: Physical Considerations: • 8.0 inch TFT Liquid Crystal Display module • 236.00 (W) x 166.00 (H) x 51.00 (D) mm •... -
Page 33: Specifications - Hd 13T21 Std-Xxx-Fxxx
Specifications - HD 13T21 STD-xxx-Fxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. TFT Technology: Physical Considerations: • 13.3 inch TFT Liquid Crystal Display module • 355.00 (W) x 248.50 (H) x 58.00 (D) mm •... - Page 34 This page left intentionally blank...
-
Page 35: Technical Drawings
Technical Drawings... -
Page 36: Technical Drawings - Hd 08T21 Std-Xxx-Fxxx
Technical Drawings - HD 08T21 STD-xxx-Fxxx Standard Version IND100132-235... -
Page 37: Technical Drawings - Hd 13T21 Std-Xxx-Fxxx
Technical Drawings - HD 13T21 STD-xxx-Fxxx Standard Version IND100132-236... - Page 38 This page left intentionally blank...
-
Page 39: Appendixes
Appendixes... -
Page 40: Pinout Assignments
Pinout Assignments All pin out assignments are seen from users Point of View (POV) while looking straight at the connector. 18/24/24+5 pin DVI-D, DVI-I, Single Link, Dual Link Combined 4 pin USB TYPE B 1 2 3 4 5 6 7 8 C1 C2 Pin 1: VCC +5V Pin 2: Negative Data... -
Page 41: Basic Trouble-Shooting
Basic Trouble-shooting GENERAL ISSUES FOR TFT PANEL BASED PRODUCTS Note: Applies for a range of various products. This is only meant as a general guide. O PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. If the LED in front is green then check if the brightness is set/adjusted to max brightness. -
Page 42: Declaration Of Conformity
Declaration of Conformity We, manufacturer, Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD, HT MMC, HD MMC and HT/HM (computers) product ranges is in conformity with the following standards in accordance with the EMC Directive. -
Page 43: Return Of Goods Information
Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned. -
Page 44: General Terms And Conditions
General Terms and Conditions As of January 2015, Hatteland Display AS’ “Terms of Sales and Delivery” and “Warranty Terms” has been substituted by the updated ”General terms and conditions for sale of goods and performance of additional services” (the “General Terms and Conditions”). -
Page 45: Pixel Defect Policy
TFT display. Neither the production at LCD-supplier nor the use of a LCD-Monitor after shipment can be influenced by Hatteland Display. Hence Hatteland Display cannot be made responsible for such dot failures. -
Page 46: Notes
Note for units equipped with an PCTS (Projected Capacitive) Touch Screen: Reference to Engineering Change Notification June 2013: http://www.hatteland-display.com/mails/10_2013_ecn.html Touch Screen Firmware V1001 (12 inch) and V1000 (15,17,19,24): For Maritime Multi Display (MMD) / Industrial Standard Display (STD) units the touch screen signals are routed through the display unit via the USB port and can not be controlled / detect status by the unit itself in any way. - Page 47 User Notes Appendix IND100077-24...
-
Page 48: Revision History
Revision History Rev. Date Notes 00-1 22 Feb 2012 Release for internal review. 07 Mar 2012 First official release. 17 Aug 2012 Revised type approvals and removed MTBF data, page 22,23 04 Oct 2013 Revised Contents of Package (connectors), page 5 Revised Product Labeling chapter, ref: QAR/117540, page 10,11 Added General Touch Screen Info and labels page 12 Added note for PCTS (Projected Capacitive) Touch Screen, page 13... - Page 49 Revision History Appendix IND100077-120...
- Page 50 w ww .hat tel and-di s p l ay . com...