Table of Contents
Advertisement
Specifications - JH C01MF A-A
DATA SHEET
Manufacturer:
Product:
Type:
Description:
USB Cable (Type A plug to Chassis mount Type A receptacle) suitable for installations that feature a secure fastening connection from
external equipment with standard Type A ports to all Hatteland Display computers and panel computers with standard USB Type A
ports. RoHS Compliance.
Specifications
• Waterproof Rate
• Recommended Panel Thickness : 0.8 to 6.0 mm
• Recommended Torque
• Mating Cap P/N
• Over Mold
• USB Type A Plug
• Cable
• Shrink Tube
• Receptacle Connector
• Type Approval / Testing
FRONT VIEW
PANEL CUT OUT
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG le.
This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-
IND100129-133
Hatteland Display AS
USB Cable 1m
JH C01MF A-A
: IP67
: 6~7 Kgf-cm
: GT1C533122
: Black color PVC
: Thermal plastic, black color housing
: Copper Alloy contacts with AU Plated nish
: Cold Roll Steel shell with NI Plated nish
: 1m, UL2725 1P x 28AWG + 2C x 24AWG+Al/My+D+B, 5.0mm thickness, black color
: L=10mm, Black color
: USB-A Plastic C3 Panel Jack screw with pig tail
: Not tested, IEC60945 and IACS E10 pending
WIRING DIAGRAM
readable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
All specifications are subject to change without prior notice!
USB Cable
SIDE / TOP VIEW
52
ACCESSORY
30 Nov 2011
Last Revised:
01
Revision#:
FRONT VIEW
1/2
Advertisement
Table of Contents
