Contents Of Package - Hatteland JH 10T06 MMD User Manual

Contents of package

This product is shipped with:
Item
4 pcs of PAN M6X25 black bolts with M6 plastic washer.
These should only be used to secure the display into a
console.
Note: If you prefer your own bolts, make sure they are minimum
M6 and 25mm in length for security reasons.
1 pcs of Standard Signal Cable and/or DVI cable.
DSUB 15P Male to DSUB 15P Male - Length 1.8m
DVI-D 24P Male to DVI-D 24P Male - Length 1.8m
Note:
1 pcs of Standard Power Cable .
(European Type F "Schuko" or US Type B standard plug)
Length 1.5m
Note: Power cable(s) not included in the DC version.
1 pcs of User Manual
Optional Accessories:
Item
4 pcs of M6X12 Unbraco bolts (Included with bracket)
These should only be used to secure the bracket on the
display.
If you prefer your own bolts, make sure they do not exceed 12mm
in length. Use any longer will do serious damage to components
inside the product!
1 pcs of Standard Serial Cable
DSUB 9p Male to DSUB 9p Male - Length approx: 1.5m
This cable is only included if you purchased a product with
touchscreen or remote control serial interface installed.
IND100131-1
Description
DVI cable only included on products that supports DVI.
Description
6
INB100005-1 (Rev 19)
Illustration
Illustration