Specifications - Jh 17T02 Mmd (Dvi) - Hatteland JH 10T06 MMD User Manual

Specifications - JH 17T02 MMD (DVI)

T E C H N I C A L D E S C R I P T I O N
TFT Technology:
• 17.0 inch viewable image size
• a-Si TFT (Thin Film Transistor) Active Matrix
• SPVA (Super Patterned Vertical Alignment) mode
TFT Characteristics:
• Pixel Number : 1280 x 1024
• Pixel Pitch (RGB) : 0.264 (H) x 0.264 (V) mm
• Response Time : 15 ms (typical), "black" to "white"
• Contrast Ratio : 1000:1 (typical)
• Light Intensity : 280 cd/m2 (typical)
• Viewable Angle : +/- 89 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 337.92 (H) x 270.336 (V) mm
• Max Colors : 16.7 millions (depending on graphics card)
Synchronisation:
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> SXGA, interlaced and non interlaced
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal : 31,5 kHz to 91,1 kHz
• Vertical : 60 Hz* to 85 Hz
* Recommended for optimum picture quality
Supported Signal Inputs:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024 *
Video Signals:
• Interlaced NTSC and PAL/SECAM video
• Composite video
• S-Video
* Recommended for optimum picture quality
Power Specifications:
Power Supply Options:
• 115 & 230VAC - 50 / 60Hz
• 24 VDC
Power Consumption:
• Operating
Compass Safe Distance: JH 17T02 MMD
This product have been tested / type approved by the following classification societies: (1=AC Ver & 2=DC Ver)
EN60945 4 th (IEC945 4 th )
EN60529 (IP66) (Applies only for flush mounting)
ClassNK - Nippon Kaiji Kyokai (1,2)
IND100129-49
: Model JH 17T02 MMD A1
: Model JH 17T02 MMD A2
: 60 W (max)
Standard: 90cm
A P P R O V A L S
ABS - American Bureau of Shipping (1,2)
BV - Bureau Veritas (1,2)
DNV - Det Norske Veritas (1,2)
Note: All specifications are subject to change without prior notice!
M E C H A N I C A L D E S C R I P T I O N
Physical Dimensions:
• 460 (W), 400 (H), 57 (D) mm
• Weight: 9.2 kg (approx w/bracket)
Input Signal Terminal:
• DVI-D (PC) signal : DVI-D Input 24pin Connector
• RGB (PC) signal : 15pin mini D-SUB (female - Input)
• Composite Video : RCA Phono plug
• S-Video signal : S-Video (SVHS) plug
• AC Power signal : Std IEC Inlet Model JH 17T02 MMD A1
• DC Power signal
Accessories:
• Touchscreen : 1 x D-SUB 9P Connector (female)
• Remote Control : 2 x D-SUB 9P Connectors (female)
User Controls:
On front bezel:
• Power On/Off (push button)
• Brightness Control
• 2 x hotkeys
• Mode Status LED
Behind hatch:
• On Screen Display control (OSD/OSM)
Environmental Considerations:
• Operating
• Storage
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Options:
• JH MMD BR = Bracket *
• JH MMDRO = Rotary Bracket *
• JH 17TSV = Sun Visor *
• JH VESA 17T01 = Vesa Bracket *
= Video Buffer (1)
• JH VBUF
• JH SCOM = Remote Control
• JH XPR = External Power Relay
• Touch Screen = Factory mounted
*Option: Standard or custom logo and color
*Option: See separate datasheet for specifications on bracket options.
(1) The JHVBUF is tested at resolutions up to 1600 x 1200. Both separate sync and
composite sync is supported. The VGA output signal is at same resolution and sync as
the input. The output is working even if the main display is turned off. (Power supply
must be connected though)
Steering: 70cm
& C E R T I F I C A T E S
GL - Germanischer Lloyd (1,2)
LRS - Lloyd's Register of Shipping (1,2)
RS - Russian Maritime Register of Shipping (1,2)
8
INB100005-1 (Rev 19)
: Screw terminal Model JH 17T02 MMD A2
: Temperature -15 deg. C to +55 deg. C
Humidity 30% to 90% (non condensing)
: Temperature -20 deg. C to +60 deg. C
Humidity 10% to 90% (non condensing)