Specifications - Jh 23T02 Mmd (Dvi) - Hatteland JH 10T06 MMD User Manual

Maritime multi display models
Hide thumbs Also See for JH 10T06 MMD:
Table of Contents

Advertisement

Specifications - JH 23T02 MMD (DVI)

T E C H N I C A L D E S C R I P T I O N
TFT Technology:
• 23.1 inch viewable image size
• Thin Film Transistor (TFT)
• MVA Premium™ technology
TFT Characteristics:
• Pixel Number
: 1600 x 1200
• Pixel Pitch (RGB)
: 0.294 (H) x 0.294 (V) mm
• Response Time
: 20 ms (typical), "black" to "white"
• Contrast Ratio
: 600:1 (typical)
• Light Intensity
: 250 cd/m2 (typical)
• Viewable Angle
: +/- 85 deg. (typical) (Up/Down/Left/Right)
: (@ CR > 10)
• Active Display Area : 470.4 (H) x 352.8 (V) mm
• Max Colors
: 16.7 millions (depending on graphics card)
Synchronisation:
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> UXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal
: 31.469 kHz to 75 kHz
• Vertical
: 56 Hz* to 75 Hz
* Recommended 60Hz for optimum picture quality. 56 Hz only in 800x600
Supported Signal Inputs:
Resolutions:
• VGA
: 640 x 480 (including 640 x 350)
• SVGA
: 800 x 600 (including 720 x 400)
• XGA
: 1024 x 768
• SXGA
: 1280 x 1024
• UXGA
: 1600 x 1200*
Video Signals:
• Interlaced NTSC and PAL/SECAM video
• Composite video
• S-Video
* Recommended for optimum picture quality. (60 Hz only)
Power Specifications:
Power Supply Options:
• 115 & 230VAC - 50 / 60Hz
• 24 VDC
Power Consumption:
• Operating
Compass Safe Distance: JH 23T02 MMD-A1
This product have been tested / type approved by the following classification societies:
EN60945 3 rd (IEC945 3 rd )
ABS - American Bureau of Shipping
BV - Bureau Veritas
EN60529 (IP66) (Applies only for flush mounting)
IND100129-7
: Model JH 23T02 MMD A1
: Model JH 23T02 MMD A2
: 100 W (max)
Standard: 260cm
A P P R O V A L S
LRS - Lloyd's Register of Shipping
DNV - Det Norske Veritas
KR - Korean Shipping (for ECDIS versions)
EN61174 (IEC1174) - Bundesamt für Seeschiffahrt und Hydrographie (BSH)
Note: All specifications are subject to change without prior notice!
M E C H A N I C A L D E S C R I P T I O N
Physical Dimensions:
• 584 (W), 534 (H), 72 (D) mm
• Weight: 17 kg (approx w/bracket)
Input Signal Terminal:
• DVI-D (PC) signal : DVI-D Input 24pin Connector
• RGB (PC) signal
: 15pin mini D-SUB (female - Input)
• Composite Video
: RCA Phono plug
• S-Video signal
: S-Video (SVHS) plug
• AC Power signal
: Std IEC Inlet Model JH 23T02 MMD A1
• DC Power signal
Accessories:
• Touchscreen
: 1 x D-SUB 9P Connector (female)
• Remote Control
: 2 x D-SUB 9P Connectors (female)
User Controls:
On front bezel:
• Power On/Off (push button)
• Brightness Control
• 2 x hotkeys
• Mode Status LED
Behind hatch:
• On Screen Display control (OSD/OSM)
Environmental Considerations:
• Operating
• Storage
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Options:
• JH 23TBRT01A1= Bracket *
• JH MMDRO
= Rotary Bracket *
• JH 23TSV
= Sun Visor *
• JH VESA 23T01 = Vesa Bracket *
= Video Buffer (1)
• JH VBUF
• JH SCOM
= Remote Control
• JH XPR = External Power Relay
• ECDIS Version = JH 23T02 MMD E1/E2 (E1=AC / E2=DC)
• ECDIS w/buzzer= JH 23T02 MMD E11/E12 (E11=AC / E12=DC)
• Touch Screen
= Factory mounted
*Option: Standard or custom logo and color
*Option: See separate datasheet for specifications on bracket options.
(1) The JHVBUF is tested at resolutions up to 1600 x 1200. Both separate sync and
composite sync is supported. The VGA output signal is at same resolution and sync as
the input. The output is working even if the main display is turned off. (Power supply
must be connected though)
Steering: 160cm
& C E R T I F I C A T E S
2
INB100005-1 (Rev 19)
: Screw terminal Model JH 23T02 MMD A2
: Temperature -15 deg. C to +55 deg. C
Humidity 30% to 90% (non condensing)
: Temperature -20 deg. C to +60 deg. C
Humidity 10% to 90% (non condensing)
ClassNK - Nippon Kaiji Kyokai
GL - Germanischer Lloyd
RS - Russian Maritime Register of Shipping

Advertisement

Table of Contents
loading

Table of Contents