Table of Contents
Advertisement
U S E R M A N U A L
Maritime Multi Computer Models
JH 10T08 MMC - 10,4 inch Maritime Multi Computer
JH 15T05 MMC - 15,0 inch Maritime Multi Computer
JH 19T02 MMC - 19,0 inch Maritime Multi Computer
JH 23T02 MMC - 23,1 inch Maritime Multi Computer
Jakob Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 5276 3700 - Fax: (+47) 5276 5444 - e-mail: jhd-no@hatteland.com
User Manual MMC (ETX)
Updated: 09 Mar 2007
Doc Id: INB100014-1 (Rev 19)
For models (including different options):
-A1, -A2, -C1, -C2
Slim
User Manual
Advertisement
Table of Contents
Related Manuals for Hatteland JH 10T08
Summary of Contents for Hatteland JH 10T08
- Page 1 U S E R M A N U A L Maritime Multi Computer Models JH 10T08 MMC - 10,4 inch Maritime Multi Computer JH 15T05 MMC - 15,0 inch Maritime Multi Computer JH 19T02 MMC - 19,0 inch Maritime Multi Computer JH 23T02 MMC - 23,1 inch Maritime Multi Computer Jakob Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway...
- Page 2 Information in this manual is copyrighted to the respective owners. All rights are reserved by Jakob Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without the prior written consent The products described, or referenced, herein are copyrighted to the respective owners.
-
Page 3: Table Of Contents
Operation ... 21 Physical Overview - MMC ETX ... 22 Specifications ... 25 Specifications - JH 10T08 MMC ... 26 Specifications - JH 15T05 MMC ... 27 Specifications - JH 19T02 MMC ... 28 Specifications - JH 23T02 MMC ... 29... - Page 4 Contents Technical Drawings ... 1 Technical Drawings - JH 10T08 MMC ... 32 Standard Version ...32 Technical Drawings - JH 15T05 MMC ... 33 Standard Version ...33 Technical Drawings - JH 19T02 MMC ... 34 Standard Version ...34 Bracket Version ...35 Technical Drawings - JH 23T02 MMC ...
-
Page 5: Contents Of Package
Contents of package This product is shipped with: Item Documentation/Drivers/Software CD(s) for factory installed components like mainboard, IDE, network etc. 1 pcs of Standard Power Cable. (European Type F “Schuko” or US Type B standard plug) Length 1.8m Note: Power cable not included in the DC version. 1 pcs of User Manual (Slim version) Note: The separate documentation for third party components may be available on attached CD. - Page 6 INB100014-1 (Rev 19)
-
Page 7: General
General INB100014-1 (Rev 19) -
Page 8: Introduction To Jakob Hatteland Display As
Jakob Hatteland Display AS Introduction to Jakob Hatteland Display AS Founded in 1987, Jakob Hatteland Display (JHD) offers the widest range of type approved marine monitors, panel computers and type approved marine computers for the worldwide commercial, naval, yacht and cruise market. Today the group develops and manufactures a complete range of IEC 60945 tested marine monitors, panel computers and IEC 60945 tested marine computers. -
Page 9: About This Manual
Jakob Hatteland Display AS Approved Marine Panel Computers (MMC) - Series 1 The combination of the reliable design of the marine TFT-LCD modules, together with industrial computer boards, allows Hatteland Display to offer a product range for customer applications where space is critical and full function is desired in a single unit. -
Page 10: Basic Construction Maritime Multi Computers
Basic Construction - Maritime Multi Computers Basic Construction Maritime Multi Computers Centerbox & component mounting platform Glass (or touchscreen option) Backcover/chassis TFT Display Front frame Front frame controller hatch Illustration General INB100014-1 (Rev 19) IND100077-19... -
Page 11: Product Labels (Example)
General IND100077-23 TOUCH SCREEN This product is equipped with a Resistive Touch Screen: Manufacturer : ELO TouchSystems Touch Controller : 2210 Serial Controller P/N 055165-000 Driver Download : www.elotouch.com VSD100564-2210... -
Page 12: Touchscreen Products
Touchscreen products Introduction to Jakob Hatteland Display products with touchscreen We use both Resistive and Capacitive touchscreen solutions for our products. Please visit our website to find your exact type number and then determine if it uses Resistive or Capacitive. If you have a customized or tailored product, please check the specifications in this manual or third-party specifications from your supplier. -
Page 13: Location Of Touchscreen Label
Please install the 3rd party software and use the Calibrate function from there. Touchscreen IND100110-3 TOUCH SCREEN This product is equipped with a Resistive Touch Screen: Manufacturer : ELO TouchSystems Touch Controller : 2210 Serial Controller P/N 055165-000 Driver Download : www.elotouch.com VSD100564-2210... - Page 14 INB100014-1 (Rev 19)
-
Page 15: Installation
Installation INB100014-1 (Rev 19) -
Page 16: General Installation Recommendations
General Installation Recommendations Installation and mounting 1. Most of our products are intended for various methods of installation or mounting (panel mounting, bracket mounting, ceiling/wall mounting etc.); for details, please see the relevant mechanical drawings. 2. Adequate ventilation is a necessary prerequisite for the life of the product. The air inlet and outlet openings must definitely be kept clear;... -
Page 17: Ergonomics
General Installation Recommendations Ergonomics 1. Adjust the unit height so that the top of the screen is at or below eye level. Your eyes should look slightly downwards when viewing the middle of the screen. 2. Adjust screen inclination to remain gaze angle to the centre of the screen approximately perpendicular to the line of gaze. -
Page 18: Cables
General Installation Recommendations - The impairment of read-out from a display screen by direct light from lamps or the sun must be avoided. Rear windows must be blacked out by means of roller blinds or Venetian blinds. - Disturbing reflections on the screen of a display caused by pilot lamps and illuminated signs must be prevented by suitable measures (screening or relocating). -
Page 19: Technical Drawings
General Installation Recommendations Maximum Cable Length The RGB/DVI cable should generally be kept as short as possible to provide a high quality output on the display. The maximum cable length will depend on the signal resolution and frequency, but also on the quality of the signal output from the computer. We recommend using 60Hz vertical frequency for our displays. - Page 20 INB100014-1 (Rev 19)
-
Page 21: Operation
Operation INB100014-1 (Rev 19) -
Page 22: Physical Overview - Mmc Etx
Physical Overview - MMC ETX Front USB Connector FRONT USB INPUT/OUTPUT: Supports any USB 2.0 (480Mbps) compliant peripherals. Drivers for most USB devices are useally included in operating system or on separate installation CD’s delivered with product. USB 1.1 devices will operate in USB 1.1 mode (12 Mbps) Harddrive LED (HDD LED): (This HDD LED is not available on 10”... -
Page 23: Rgb Output
Physical Overview - MMC ETX PCI SLOT 1 PCI SLOT 2 COM4, COM2 COM3, COM1 Network GigaBitLAN & LAN NOTE: Available connectors / locations (may) vary depending on model ! PCI Slots 1&2: (Not available on all models!) Supports PCI (Short Length / Standard Profile) card in two available slots. These PCI cards are normally installed from factory or returned to factory for upgrading if needed. - Page 24 Physical Overview - MMC ETX PS/2 Keyboard and PS/2 Mouse INPUTS: Connect the PS/2 keyboard cable to the PS/2 5P Connector (female) marked with KEYBOARD. Connect the PS/2 mouse cable to the PS/2 5P Connector (female) marked with MOUSE. CompactFlash Reader: CompactFlash Reader supports Type I &...
-
Page 25: Specifications
Specifications INB100014-1 (Rev 19) -
Page 26: Specifications - Jh 10T08 Mmc
** If resolutions is set above 1:1, desktop scrolling mode will be used. Power Specifications: Power Supply Options: • 115 & 230VAC - 50/60Hz : Model JH 10T08 MMC A1 • 24 VDC : Model JH 10T08 MMC A2 Power Consumption: •... -
Page 27: Specifications - Jh 15T05 Mmc
Specifications - JH 15T05 MMC T E C H N I C A L D E S C R I P T I O N TFT Technology: • 15.0 inch viewable image size • Color Active Matrix LCD Module • a-Si Thin Film Transistor (TFT) TFT Characteristics: •... -
Page 28: Specifications - Jh 19T02 Mmc
Specifications - JH 19T02 MMC T E C H N I C A L D E S C R I P T I O N TFT Technology: • 19.0 inch viewable image size • Active Matrix, Thin Film Transistor (TFT) •... -
Page 29: Specifications - Jh 23T02 Mmc
Specifications - JH 23T02 MMC T E C H N I C A L D E S C R I P T I O N TFT Technology: • 23.1 inch viewable image size • Thin Film Transistor (TFT), MVA Premium™ Technology TFT Characteristics: •... - Page 30 INB100014-1 (Rev 19)
-
Page 31: Technical Drawings
Technical Drawings INB100014-1 (Rev 19) -
Page 32: Technical Drawings - Jh 10T08 Mmc
Technical Drawings - JH 10T08 MMC Measurements shown in mm Standard Version INB100014-1 (Rev 19) IND100132-94... -
Page 33: Technical Drawings - Jh 15T05 Mmc
Technical Drawings - JH 15T05 MMC Measurements shown in mm Standard Version INB100014-1 (Rev 19) IND100132-62... -
Page 34: Technical Drawings - Jh 19T02 Mmc
Technical Drawings - JH 19T02 MMC Measurements shown in mm Standard Version INB100014-1 (Rev 19) IND100132-63... -
Page 35: Bracket Version
Technical Drawings - JH 19T02 MMC Bracket Version INB100014-1 (Rev 19) IND100132-63... -
Page 36: Technical Drawings - Jh 23T02 Mmc
Technical Drawings - JH 23T02 MMC Measurements shown in cm Standard Version INB100014-1 (Rev 19) IND100132-68... -
Page 37: Bracket Version
Technical Drawings - JH 23T02 MMC Bracket Version INB100014-1 (Rev 19) IND100132-68... - Page 38 INB100014-1 (Rev 19)
-
Page 39: Technical Drawings - Accessories
Technical Drawings - Accessories INB100014-1 (Rev 19) -
Page 40: Mmc Etx Bracket
Technical Drawings - Accessories MMC Bracket INB100014-1 (Rev 19) IND100132-78... -
Page 41: Appendixes
Appendixes INB100014-1 (Rev 19) -
Page 42: Pin Assignments - Common Connectors
Pin Assignments - Common Connectors Note: Not all connectors may be available on your specific product. This depends on the amount of additional hardware installed from factory, or customized solutions. These pin assignments are for the common connectors used. Pin Assignments - RJ5 10/100 LAN 1 2 5 7 Pin 01 - TDP Transmit Differential Pair (Positive) - Page 43 Pin Assignments - Common Connectors 1 12 11 10 9 7 5 2 1 25 2 2 22 21 20 19 1 17 1 15 1 Pin 01 - STROBE This signal indicates to the printer that data at PD7..0 are valid. Pin 02 - DATA0 Parallel data bus from PC board to printer.
- Page 44 Pin Assignments - Common Connectors (Additional) Note: These pin assignments applies for products with customer specified COM ports (factory setup). These COM ports are configurable on the motherboard located inside the product. Panel Computers: Attempting to config these yourselves, could result in warranty void as the main cover would have to be removed.
-
Page 45: Basic Trouble-Shooting
Basic Trouble-shooting COMMON ERRORS: (This is a generic description of possible issues for a varity of products) If for some reason there should be something wrong with the picture quality or no picture present, check the symptoms carefully and try to cure it with the hints below: NO PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. -
Page 46: Declaration Of Conformity
Declaration of Conformity We, manufacturer Jakob Hatteland Display A/S Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HT STD (Series 1) and HD MMD, HT MMC (Series 2) products is in conformity with the following standards in accordance with the EMC Directive. -
Page 47: Return Of Goods Information
Return Of Goods Information Return of goods: (Applies not to warrenty/normal service/repair of products) Before returning goods, please contact your system supplier before sending anything directly to JHD. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned to JHD. -
Page 48: Terms
Terms The Hatteland Group - Terms Of Sale And Delivery: 1) APPLICATION The terms of sale and delivery include the following companies: Autostore AS, Jakob Hatteland Assembly AS, Jakob Hatteland Computer AS, Jakob Hatteland Display AS, Jakob Hatteland Logistics, Jakob Hatteland Supply AS and Jakob Hatteland Technology AS. - Page 49 Terms 11) RESPONSIBLITY Seller undertake to deliver faultless and functional capable goods according to existing technical specifications. Seller disclaim responsibility for any damage or loss which directly or indirectly may be caused due to failure or defect with the delivered goods, if carelessness from the seller can be limited up to the cost of the goods. The supplier’s responsibility for defects with the supplied goods do not include secondary damage or loss.
- Page 50 Terms 1) CONTROL Control the goods immediately by receipt. Examine the quantity towards the invoice/packinglist/shipping documents. Look for outward defects on the packing which may indicate damage on or loss of contents. Control the container and the seals for any defects. 2) SECURING EVIDENCE When defects on the goods have been found, evidence must be secured, and seller must be informed.
-
Page 51: Notes
Notes General Notes: (For all products) - The unit is type approved according to EN60945 4 th , 4.4, equipment category b) protected from the weather. - Other type approvals applies for the different products. Please see Testing & Approvals Overview section in this manual for more information. - Use of brightness and push buttons may inhibit visibility of information at night. -
Page 52: Important Bios Reset / No Picture Information
Notes Important BIOS Reset / No picture information Please note that when performing a “Load Optimized Defaults” or “Load Fail-Safe Defaults” command in the BIOS menu, or if the internal ETX processor module was replaced, the picture on the TFT display will be black and the sync will be lost upon restart. No picture will be present on the MMC unit! However, by using the standard RGB OUT DSUB connector connected to an external TFT Display or CRT Monitor, you will get a cloned picture from the MMC unit. -
Page 53: Revision History
15 Sep 06 Updated specifications. Changed 5400 rpm to 4200 rpm 02 Oct 06 Added JH 10T08 MMC 02 Jan 07 Updated testing and type approvals for various products. Updated specifications for all MMC products. Available processor range now up to 2.0 GHZ. -
Page 54: Contact Information
Contact Information Head office, Vats / Norway: Sales office, Oslo / Norway: Sales office, Tønsberg / Norway: Sales office, Frankfurt / Germany: Jakob Hatteland Display GmbH Werner Heisenberg Strasse 12, D-63263 Neu-Isenburg, Germany Sales office, Aix-en-Provence / France: Jakob Hatteland Display SAS Espace Cézanne - 14 Parc du Golf 350, Avenue JRGG de la Lauzière - CS 90519 13593 Aix-en-Provence Cedex 3, France...
Need help?
Do you have a question about the JH 10T08 and is the answer not in the manual?
Questions and answers