User Controls - Hatteland JH 10T06 MMD User Manual

User Controls

POWER SWITCH:
This TFT display features a Instant-ON/Delay-OFF switch, which ensures that the display is not turned off
by user accident.
Power ON: To turn the display on, press down
the power switch. The power light
indicator will turn green.
(If no RGB signal sync is present, "NO SYNC"
message will appear in the display)
Power OFF: To turn the display off, press and
hold the power switch down for
3 seconds.
DISPLAY ADJUSTMENT CONTROLS:
This TFT display features a 100% dimmable image, which means it is capable of displaying a completely
black image when the BRIGHTNESS knob is turned fully to the left.
NOTE1: The design and placement of the user / osd controls may vary from product to product !
NOTE2: For ECDIS systems the brightness knob indication mark should be aligned directly with
the indication mark located on the label. (See illustration above)
AUTOMATIC POWER LIGHT DIMMING:
This TFT display features a Power LED Dimmer function which control the light intensity of the power light
indicator. There are two different solutions for this feature.
1- Intelligent Auto Power LED Dimmer which control the light intensity based on your environment
lightning. This can also be manually adjusted using the Led Adjust knob on the rear side of the
display.
2- The light intensity is regulated according to the backlight, that is according to the brightness
knob. With the exception that when the backlight brightness is zero, the power led is just visible
in dark environment. This means that the power led is not visible in daylight when the brightness
knob is turned fully to the left.
Note:
If there is a led adjustment knob at the connection area of the display as described in "INSTALLATION
AND RECOMMENDATIONS" chapter, the manner of operation described in paragraph one applies. For
displays produced after the creation date of this manual, paragraph two applies. For displays produced
before year 2002, paragraph one applies.
ASSIGNABLE HOT KEYS:
The user can assign various display functions as hot keys (increase/decrease).
This will enable the user to quickly adjust the brightness, image size, contrast or other functions to
control the image. To assign these hot keys, enter the "UTILITIES MENU/DIRECT ACCESS" menu and
change them to the desired hot key function. Default hot keys are set to increase/decrease volume.
Operation
IND100064-0
Assignable Hot keys
Indication Mark
Brightness Knob
22
INB100005-1 (Rev 19)
Auto Power LED Dimmer
Power Switch
Power Light Indicator