Table of Contents
Advertisement
Quick Links
U S E R M A N U A L
Series 2 - Displays and Backpack range
HD MMD01 xxx - Maritime Multi Display Backpack
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 5276 3700 - Fax: (+47) 5276 5444 - e-mail: jhd-no@hatteland.com
HD 12T04 xxxx - 12.1 inch Display
HD 15T06 xxxx - 15.0 inch Display
HD 19T03 xxxx - 19.0 inch Display
Updated: 22 Nov 2007
For models:
BOAA, BOBA, FOAA, FOBA, COAA, COBA (standard models)
BOAC, BOBC, FOAC, FOBC, COAC, COBC (with touch screen)
MMD01-Ax1, MMD01-Ax2 (AC and DC)
MMD01-Cx1, MMD01-Cx2 (AC and DC + touch support)
Please visit our website for the latest electronic version of this manual.
User Manual MMD Series 2
Doc Id: INB100026-1 (Rev 9)
Advertisement
Table of Contents
Related Manuals for Hatteland HD 12T04 series
Summary of Contents for Hatteland HD 12T04 series
- Page 1 MMD01-Cx1, MMD01-Cx2 (AC and DC + touch support) Please visit our website for the latest electronic version of this manual. Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 5276 3700 - Fax: (+47) 5276 5444 - e-mail: jhd-no@hatteland.com...
- Page 2 Information in this manual is copyrighted to the respective owners. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without the prior written consent of Hatteland Display AS.
-
Page 3: Table Of Contents
Contents Contents .................. Contents of package ................6 General ..................7 Introduction to Hatteland Display AS ..........8 About this manual ................9 Basic Construction - Series 2 ............10 Product Labels (Examples) .............. 11 Serial Number Labels Placement ..........11 Warranty Label ................ - Page 4 Contents Specifications ................. 7 Specifications - HD 12T04 BOxx + HD MMD01-xxx ......38 Specifications - HD 12T04 FOxx + HD MMD01-xxx ......39 Specifications - HD 12T04 COxx + HD MMD01-xxx ......40 Specifications - HD 15T06 BOxx + HD MMD01-xxx ......41 Specifications - HD 15T06 FOxx + HD MMD01-xxx ......
- Page 5 Contents Appendixes ................67 Pin Assignments - Common Connectors .......... 68 Preset Signal Timings ...............70 Basic Trouble-shooting ..............72 Declaration of Conformity ..............73 Return Of Goods Information ............74 Terms ....................75 Pixel Defect Policy ................77 Notes ....................78 Display Firmware Version ............78 Safety Considerations ..............78 Revision History ................80 Contact Information ...............
-
Page 6: Contents Of Package
Contents of package This product is shipped with: Item Description Illustration 1 pcs of Standard DVI Signal Cable. DVI-D 24P Male to DVI-D 24P Male - Length 1.8m 1 pcs of Standard VGA Signal Cable DSUB 15P Male to DSUB 15P Male - Length 1.8m 1 pcs of Standard Power Cable . -
Page 7: General
General INB100026-1 (Rev 9) -
Page 8: Introduction To Hatteland Display As
IP66 rating. This new HATTELAND® Series 2 Panel Computers MMC2 and Displays MMD2 will be available from Q2 2006 onwards in 12in., 15in. and 19in. sizes. The concept allows easy scaling in sizes from small LCD screens up to large sizes of more than 32in LCD wide-screens. -
Page 9: About This Manual
The combination of the reliable design of the marine TFT-LCD modules, together with industrial computer boards, allows Hatteland Display to offer a product range for customer applications where space is critical and full function is desired in a single unit. In particular, the standardized ETX-board form factor allows full flexibility when it comes to processor choice. Because of... -
Page 10: Basic Construction - Series 2
Basic Construction - Series 2 Basic Construction - Series 2 Bonded Glass/TFT Electronics / PCB’s Backpack Cover Backpack Casing Backpack Electronics Stand Bracket Centerbox Mounting Flange* Casing User Controls (Bracket or Console Version) USB Hatch *Available with or without flange (factory default deliverance) Modular Backpack Concept - Series 2 Display and MMD2 (Display) Backpack Display and MMC2 (Computer) Backpack... -
Page 11: Product Labels (Examples)
Product Labels (Examples) Serial Number Labels Placement The Series 2 products are based on a modular backpack concept, which allows users to easily change the functionality. Both the display modules and the backpack modules are by factory default labelled with unique labels. These are located as illustrated below. Location Display Module: Location Backpack Module: Top of backpack... -
Page 12: Serial Number Label Layout (Display Module)
Product Labels (Example) Serial Number Label Layout (Display Module) Manufacturer & Country Description Manufacturer HATTELAND DISPLAY AS - NORWAY Product 1 Inch TFT - Series 2 Product type HD 1T0 BOAA SERIAL NUMBER HD 1T0 BOAA-0000120 Code 128 Product Type... -
Page 13: Touchscreen Products
Touchscreen products Introduction to products with touchscreen Both Resistive and Capacitive touchscreen solutions are used for our products. Please visit our website to find your exact type number and then determine if it uses Resistive or Capacitive. If you have a customized or tailored product, please check the specifications in this manual or third-party specifications from your supplier. -
Page 14: Location Of Touchscreen Label
Up-2-date touchscreen drivers and documentation: Please visit the 3rd party website as indicated on the label. You can also visit our website www.hatteland-display.com to view the full list of our models with touchscreen. Before using the touchscreen, it should be calibrated for your system. -
Page 15: Installation
Installation INB100026-1 (Rev 9) -
Page 16: General Installation Recommendations
General Installation Recommendations Installation and mounting 1. Most of our units are intended for various methods of installation or mounting (panel mounting, bracket mounting, ceiling/wall mounting etc.); for details, please see the relevant mechanical drawings. 2. Adequate ventilation is a necessary prerequisite for the life of the unit. -
Page 17: Panel Cut-Out Mounting Precaution
General Installation Recommendations Panel cut-out mounting precaution If you intend to mount the bracket / stand-alone product into a precut panel, make sure you have read and understood the following section. The Series 2 frameless design means that the front glass reaches all the way to the outer rims of the product. -
Page 18: General Mounting Instructions
General Installation Recommendations 2. Adjust the unit height so that the top of the screen is at or below eye level. Your eyes should look slightly downwards when viewing the middle of the screen. 3. Adjust screen inclination to remain gaze angle to the centre of the screen approximately perpendicular to the line of gaze. -
Page 19: Cables
General Installation Recommendations Cables Use only high quality shielded signal cables for RGB / DVI signals. Cable Entries & Connectors (Marked area) - Illustration only Bottom View Back View Maximum Cable Length The signal cables should generally be kept as short as possible to provide a high quality output on the display. -
Page 20: Backpack / Bracket Replace / Removal - Series 2
Backpack / Bracket Replace / Removal - Series 2 Backpack / Bracket Replace / Removal - Series 2 How to change functionality / replace backpacks or remove bracket from product. The Series 2 products are based on a modular backpack concept, which allows users to easily change the functionality. - Page 21 HD MMD01-A01-0000128 (Backpack) HD 19T03 BOAA-0000120 (Display module) 6: The HATTELAND® Series 2 products are shipped mounted and fully operational with a customized combination of display unit and backpack unit. The two serial numbers are linked and registered by Hatteland, and together constitute an important basis for future customer service, quality records and technology improvements.
- Page 22 This page left intentionally blank INB100026-1 (Rev 9)
-
Page 23: Operation
Operation Series 2 Products INB100026-1 (Rev 9) -
Page 24: User Controls
IP66 rated. Please refer to the illustrations below to determine what version you have and how to operate the unit. The USB connector is located behind the HATTELAND® rubber hatch in the right lower corner in the front. -
Page 25: Status Led Overview
Status LED Overview HOT KEY FUNCTION: User can access input video/signal sources by DOUBLE clicking the navigator knob/button inwards. The cycle of the video/signal detection are; Analog RGB1, Analog RGB2, DVI, Composite Video & S-Video. It will only switch to the next detectable video/signals sources that are present (physically connected). -
Page 26: On Screen Display (Osd) Menu Navigating
On Screen Display (OSD) Menu Navigating QUICK START: The On Screen Display (OSD menu) is accessible by pushing the navigator knob/button inwards AND hold it for 3 seconds. To understand the menu and its usage, please follow these steps for a quick start. 1-BUTTON VERSION: (with rotary switch and USB Connector) 1: While powered on, and image visible on screen, push the navigator knob inwards and hold for 3 seconds. -
Page 27: On Screen Display (Osd) Menu Overview
On Screen Display (OSD) Menu Overview Mode 1 - Function layout in RGB / DVI MODE “Simplified” OSD Menu: Note that to be in RGB / DVI MODE, a computer signal must be present in full screen, i.e Windows or other operating system/radar system. - Page 28 On Screen Display (OSD) Menu Overview Mode - Function layout in VIDEO MODE “Simplified” OSD Menu: Note: To access this menu, a video signal must be present in full screen, i.e from a camera, VCR or DVD player. Video Adjustment Color Tint Sharpness...
-
Page 29: On Screen Display (Osd) Menu Functions
On Screen Display (OSD) Menu Functions BRIGHTNESS AND CONTRAST: (No function for DVI signals) Selecting this function will enable the user to adjust brightness and contrast for the display. (No Function in DVI) BRIGHTNESS: Increase/decrease brightness level, total: 100 steps (No Function in DVI) CONTRAST: Increase/decrease contrast level, total: 100 steps COLOR TEMPERATURE... - Page 30 On Screen Display (OSD) Menu Functions STATUS: Selecting this function will display graphic information such as the detected incoming resolution and frequency. POSITION: (No function in DVI mode) Selecting this function will enable the user to position the image within the display area.
- Page 31 On Screen Display (OSD) Menu Functions GRAPHIC SCALING MODES: Selecting this function will enable the user to configure the graphic scaling of the RGB/DVI or VIDEO image. The change will happen realtime. Note: Some of these functions will impact on image quality, and will therefore not show the optimal 1:1 picture with correct aspect ratio and resolution suitable for the TFT module.
- Page 32 On Screen Display (OSD) Menu Functions UTILITIES: Selecting this function will enable the user to configure the OSD menu behaviour, image properties, verify BIOS Firmware version and miscellaneous operations. USER SETTING: (Click to enter sub-menu) DPMS : Disable / Enable the DPMS (power saving when no signal) DISPLAY INPUT : Disable / Enable displaying signal source name as OSD text.
- Page 33 On Screen Display (OSD) Menu Functions LOAD DEFAULT: (Click to enter sub-menu) LOAD USER DEFAULT : Load your own custom settings. SAVE USER DEFAULT : Save your own custom settings. LOAD FACTORY DEFAULT : Will reset the VGA controller settings to the factory preset. Use caution when using this function, as this will override your current settings.
-
Page 34: Physical Connections - Mmd Backpack Series 2
Physical Connections - MMD Backpack Series 2 Connection area of backpack (illustration) DVI-I IN RGB IN COM1 COM2 Power Input S-Video IN Area Composite Video IN USB OUT DVI-I IN / RGB2 IN: (Supports both DVI & Analog RGB) Connect the DVI cable to the DVI-I 24+5P Connector (female) on the rear side of the TFT display. Screw the DVI cable to the connector spacers and make sure you don’t bend any of the pins inside the DVI cable connector. - Page 35 TFT display such as brightness via customized software. For in-depth information, see www.hatteland-display.com: “Support/Accessories/HATTELAND® SCOM/Technical Manual” as PDF file. COM2 - TOUCH/FEATURE CONNECTOR: On Touch Screen versions of the backpack a USB Type B Connector is factory mounted here which should be connected to a computer with touch screen drivers installed.
- Page 36 This page left intentionally blank INB100026-1 (Rev 9)
-
Page 37: Specifications
Specifications INB100026-1 (Rev 9) -
Page 38: Specifications - Hd 12T04 Boxx + Hd Mmd01-Xxx
Specifications - HD 12T04 BOxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 12T04 BOxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 39: Specifications - Hd 12T04 Foxx + Hd Mmd01-Xxx
Specifications - HD 12T04 FOxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 12T04 FOxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 40: Specifications - Hd 12T04 Coxx + Hd Mmd01-Xxx
Specifications - HD 12T04 COxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 12T04 COxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 41: Specifications - Hd 15T06 Boxx + Hd Mmd01-Xxx
Specifications - HD 15T06 BOxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 15T06 BOxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 42: Specifications - Hd 15T06 Foxx + Hd Mmd01-Xxx
Specifications - HD 15T06 FOxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 15T06 FOxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 43: Specifications - Hd 15T06 Coxx + Hd Mmd01-Xxx
Specifications - HD 15T06 COxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 15T06 COxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 44: Specifications - Hd 19T03 Boxx + Hd Mmd01-Xxx
Specifications - HD 19T03 BOxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 19T03 BOxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 45: Specifications - Hd 19T03 Foxx + Hd Mmd01-Xxx
Specifications - HD 19T03 FOxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 19T03 FOxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 46: Specifications - Hd 19T03 Coxx + Hd Mmd01-Xxx
Specifications - HD 19T03 COxx + HD MMD01-xxx PRODUCT SPECIFICATIONS - HD 19T03 COxx + HD MMD01-xxx Note: All specifications are subject to change without prior notice! T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N Physical Considerations: TFT Characteristics:... -
Page 47: Technical Drawings
Technical Drawings INB100026-1 (Rev 9) -
Page 48: Technical Drawings - Hd 12T04 Boxx + Hd Mmd01-Xxx
Technical Drawings - HD 12T04 BOxx + HD MMD01-xxx Bracket Models INB100026-1 (Rev 9) IND100132-86... -
Page 49: Technical Drawings - Hd 12T04 Foxx + Hd Mmd01-Xxx
Technical Drawings - HD 12T04 FOxx + HD MMD01-xxx Flange Models INB100026-1 (Rev 9) IND100132-86... - Page 50 Technical Drawings - HD 12T04 FOxx + HD MMD01-xxx 12” Panel Mounting INB100026-1 (Rev 9) IND100132-86...
-
Page 51: Technical Drawings - Hd 12T04 Coxx + Hd Mmd01-Xxx
Technical Drawings - HD 12T04 COxx + HD MMD01-xxx Console Models INB100026-1 (Rev 9) IND100132-86... -
Page 52: Technical Drawings - Hd 15T06 Boxx + Hd Mmd01-Xxx
Technical Drawings - HD 15T06 BOxx + HD MMD01-xxx Bracket Models INB100026-1 (Rev 9) IND100132-87... -
Page 53: Technical Drawings - Hd 15T06 Foxx + Hd Mmd01-Xxx
Technical Drawings - HD 15T06 FOxx + HD MMD01-xxx Flange Models INB100026-1 (Rev 9) IND100132-87... - Page 54 Technical Drawings - HD 15T06 FOxx + HD MMD01-xxx 15” Panel Mounting INB100026-1 (Rev 9) IND100132-87...
-
Page 55: Technical Drawings - Hd 15T06 Coxx + Hd Mmd01-Xxx
Technical Drawings - HD 15T06 COxx + HD MMD01-xxx Console Models INB100026-1 (Rev 9) IND100132-87... -
Page 56: Technical Drawings - Hd 19T03 Boxx + Hd Mmd01-Xxx
Technical Drawings - HD 19T03 BOxx + HD MMD01-xxx Bracket Models 1/2 INB100026-1 (Rev 9) IND100132-88... - Page 57 Technical Drawings - HD 19T03 BOxx + HD MMD01-xxx Bracket Models 2/2 INB100026-1 (Rev 9) IND100132-88...
-
Page 58: Technical Drawings - Hd 19T03 Foxx + Hd Mmd01-Xxx
Technical Drawings - HD 19T03 FOxx + HD MMD01-xxx Flange Models INB100026-1 (Rev 9) IND100132-88... - Page 59 Technical Drawings - HD 19T03 FOxx + HD MMD01-xxx 19” Panel Mounting INB100026-1 (Rev 9) IND100132-88...
-
Page 60: Technical Drawings - Hd 19T03 Coxx + Hd Mmd01-Xxx
Technical Drawings - HD 19T03 COxx + HD MMD01-xxx Console Models INB100026-1 (Rev 9) IND100132-88... -
Page 61: Accessories
Accessories INB100026-1 (Rev 9) -
Page 62: Technical Drawings - Hd Xxvesa Tbr-A1
Technical Drawings - HD xxVESA TBR-A1 Suitable for models above 12” products VESA Bracket INB100026-1 (Rev 9) IND100132-102... -
Page 63: Technical Drawings - Hd Xxtbr Cmb-A1
Technical Drawings - HD xxTBR CMB-A1 Available in 1,2 and 3 cut pieces. INB100026-1 (Rev 9) Console Mounting Bracket (CMB) IND100132-124... - Page 64 Technical Drawings - HD xxTBR CMB-A1 Available in 1,2 and 3 cut pieces. INB100026-1 (Rev 9) Console Mounting Bracket (CMB) IND100132-124...
-
Page 65: Specifications - Serial Split Cable
Accessories INB100026-1 (Rev 9) Dimensions might be shown with or without decimals. Tolerance on drawings is +/- 1mm. For accurate measurements, use relevant DWG le available from Hatteland Display AS IND100129-77 This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-... - Page 66 This page left intentionally blank INB100026-1 (Rev 9)
-
Page 67: Appendixes
Appendixes INB100026-1 (Rev 9) -
Page 68: Pin Assignments - Common Connectors
Pin Assignments - Common Connectors Note: Not all connectors may be available on your specific product. This depends on the amount of additional hardware installed from factory, or customized solutions. These pin assignments are for the common connectors used. Connectors are seen from users Point Of View (POV). Pin Assignments - USB TYPE A Pin Assignments - RJ5 10/100 LAN Pin 2: Negative Data... - Page 69 Pin Assignments - Common Connectors Pin Assignments - 25P Parallel 1 12 11 10 8 7 6 5 2 1 25 2 2 22 21 20 1 18 17 16 15 1 Pin 01 - STROBE This signal indicates to the printer that data at PD7..0 are valid. Pin 02 - DATA0 Parallel data bus from PC board to printer.
-
Page 70: Preset Signal Timings
APPENDIX II – SUPPORTED MODES TABLE Preset Signal Timings Graphic/Video Modes Supported Mode Resolution Clk [MHz] Horizontal freq Vertical freq Sync Mode [KHz] [Hz] E1_70 640x350 25.175 31.469 Digital Separate Sync E1_70 640x350 25.175 31.469 Sync On Green (with or without serrate pulse) E1_70 640x350 25.175... - Page 71 Preset Signal Timings X_60 1024x768 65.000 48.363 Sync On Green (with or without serrate pulse) X_60 1024x768 65.000 48.363 Composite Sync (with or without serrate pulse) X_70 1024x768 75.000 56.476 Digital Separate Sync X_70 1024x768 75.000 56.476 Sync On Green (with or without serrate pulse) X_70 1024x768 75.000...
-
Page 72: Basic Trouble-Shooting
Basic Trouble-shooting COMMON ERRORS: (This is a generic description of possible issues for a varity of products) If for some reason there should be something wrong with the picture quality or no picture present, check the symptoms carefully and try to cure it with the hints below: NO PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. -
Page 73: Declaration Of Conformity
Declaration of Conformity We, manufacturer Hatteland Display AS Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HT STD (Series 1) and HD MMD, HT MMC (Series 2) products is in conformity with the following standards in accordance with the EMC Directive. -
Page 74: Return Of Goods Information
Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned. -
Page 75: Terms
Goods are considered delivered to customer when handed over to charterer. 8) FREIGHT / PACKING / FORWARDING FEE Hatteland Display AS charge NOK 50,- in forwarding fee for orders below NOK 1000,-. Freight charge according to expenses for orders above NOK 1000,-. VAT not included. - Page 76 Terms 12) CANCELLATION / RETURN Binding sales contract is concluded when we have confirmed customer’s purchase order. Any disagreements in our order confirmation must be reported to seller within 6 days. The agreement can not be altered without our permission, after acceptance from our supplier.
-
Page 77: Pixel Defect Policy
TFT display. Neither the production at LCD-supplier nor the use of a LCD-Monitor after shipment can be influenced by Hatteland Display. Hence Hatteland Display cannot be made responsible for such dot failures. -
Page 78: Notes
Notes General Notes: - The unit is type approved according to EN60945 (1997), 4.4, equipment category b) protected from the weather. - Use of brightness and push buttons may inhibit visibility of information at night. - Other type approvals applies for the different products. Please see Testing &... - Page 79 Notes Appendix INB100026-1 (Rev 9) IND100077-24...
-
Page 80: Revision History
Revision History Rev. Date Notes 04 May 06 First release, User Manual for Display Module and MMD2 backpack. 12 Sep 06 Revised specifications and added touch screen chapter. Revised general incorrect text where needed. Type approval page removed, and information merged with the respective product specification pages. 29 Jan 07 Minor text changes. - Page 81 Appendix INB100026-1 (Rev 9) IND100077-42...
-
Page 82: Contact Information
Contact Information Head office, Vats / Norway: Hatteland Display AS Åmsosen N-5578 Nedre Vats, Norway Tel: +47 5276 3700 Fax: +47 5276 5444 Sales office, Oslo / Norway: Hatteland Display AS Gjerdrums vei 12 N-0484 Oslo, Norway Tel: +47 5276 3700 Fax: +47 2258 6790 Sales office, Tønsberg / Norway:...