Hatteland JH 10T06 MMD User Manual page 23

Operation
USER CONTROLS:
The On Screen Display (OSD menu) controls are located under the metal hatch on the left side
of the display. To begin understanding the menu and its usage, just follow these steps for a quick start.
1: Press the "MENU" button. The OSD menu will show all the available functions you
can adjust or control.
2: You can move to the next icon by pressing "MENU".
3: Select options within icon menu by pressing "UP" or "DOWN" buttons.
The selected option will turn yellow.
4: Use "+" or "-" buttons to increase/decrease values.
5: Move the selection left or right by using "+" or "-" buttons. The selected option will turn green.
6: To confirm the selection, press "+" button. To abort press "-" button.
OSD MENU:
The On Screen Display (OSD menu) contains several functions that will let the user to adjust
or setup the display to their preferred setting. The functions are shown as easy understandable icons.
Some of the menus have sub-menus, use "+" to access and "MENU" to go back to the previous menu.
The OSD menu consists of 4 modes: (Icon beside function indicates if it's available in that mode)
1
Mode 1 - Available functions in RGB / DVI* MODE Simplified OSD Menu - (Logo will appear)
2
Mode 2 - Available functions in RGB / DVI* MODE Advanced OSD Menu - (No logo will appear)
Mode  - Available functions in VIDEO MODE Simplified OSD Menu - (Logo will appear)
3
Mode  - Available functions in VIDEO MODE Advanced OSD Menu - (No logo will appear)
4
RGB/DVI MODE = When RGB/DVI signal (i.e OS or radar / charts) are displayed full screen.
VIDEO MODE = When video signal (i.e CAMERA / VCR / DVD) are displayed full screen.
To access the "Advanced/Full" OSD Menu, you must press and hold the "DOWN" button while turning power on. When picture appears, release
the "DOWN" button and press "MENU" to access the "Advanced/Full" functions. If you have the "Memorized state" version of the OSD menu,
use the same procedure to switch between "Simplified/Normal" & "Advanced/Full" modes (also known as NORMAL/TOGGLE).
For more information about "Memorized state" and the different OSD menu modes, see the "NOTES" section in this manual.
WARNING !! ONLY A QUALIFIED SERVICE ENGINEER SHOULD ACCESS THE ADVANCED/SERVICE MENU.
Operation
IND100064-0
MENU UP / DOWN Buttons
Adjust Buttons -/+
User can adjust the most common functions needed to operate the display.
*Some functions are not available in DVI mode
User can access more advanced functions. (Service menu)
*Some functions are not available in DVI mode
User can adjust the most common functions needed to operate the display.
User can access more advanced functions. (Service menu)
PERFORMANCE OF THE DISPLAY MAY BE SERIOUSLY AFFECTED.
2
INB100005-1 (Rev 19)