Hatteland JH 10T06 MMD User Manual page 30

OSD Menu Functions
1
2
CALIBRATE RGB GAIN
2
DISPLAY ORIENTATION: (Press "+" to access the sub-menu)
4
Will flip/inverse the display area including PIP view. Press "+" to choose between:
Normal / Horizontal Inverse / Vertical Inverse / Inverse
1
2
LOAD (FACTORY) DEFAULTS: (Press "+" to access the sub-menu).
3 4
LOAD USER DEFAULT
SAVE USER DEFAULT
LOAD FACTORY DEFAULT
SETUP DDC
1
2
TEST PATTERN
4
3
1
2
EXIT MENU:
3 4
Selecting this function will exit the OSD menu.
Press "+" to exit and save the current settings.
Note:
The OSD settings will also automatically be stored in memory when the OSD exit on user timeout .
User Controls
IND100064-17
: Color Calibration. Press "+" to automatically adjust it.
: Load your own personal custom settings.
: Save your own personal custom settings.
: Will reset the graphic controller settings to the factory preset.
Use caution when using this function, as this will override
your current settings.
: Reset/optimize image information. This function will setup
correct DDC (Display Data Channel) information. It allows
the display module to send its specifications to the display
controller. This information is used by the OSD menu.
: Shows a generic test pattern.
0
INB100005-1 (Rev 19)