Specifications - Jh 15T17 Mmd-Xxx-Axxx (Ccfl Version) - Hatteland JH 15T17 MMD series User Manual

Specifications - JH 15T17 MMD-xxx-Axxx (CCFL version)

SPECIFICATIONS
TFT Technology:
• High Quality SHARP TFT
• 15.0 inch viewable image size
• Color Active Matrix LCD Module
• a-Si Thin Film Transistor (TFT)
TFT Characteristics:
• Pixel Number : 1024 x 768
• Pixel Pitch (RGB) : 0.297 (H) x 0.297 (V) mm
• Response Time : 25 ms (typical), "black" to "white"
• Contrast Ratio : 400:1 (typical)
• Light Intensity : 250 cd/m2 (typical)
• Viewable Angle : +/- 85 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 304.1 (H) x 228.1 (V) mm
• Max Colors : 16.7 millions
Synchronisation:
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal : 15,0 kHz to 91,1 kHz
• Vertical : 60 Hz* to 85 Hz
* Recommended for optimum picture quality
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768*
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
Power Specifications:
Power Supply Options:
• 115&230VAC - 50/60Hz - JH 15T17 MMD-Axx-xxxx
• 24 VDC - JH 15T17 MMD-Dxx-xxxx
Power Consumption:
Operating : 100 W (max)
Typical Type Numbers:
• JH 15T17 MMD-AA1-AAAA = Standard AC, Keypad controls only
• JH 15T17 MMD-DA1-AAAC = Standard DC & Capacitive Touch Screen
• JH 15T17 MMD-AA1-AOBA = Standard AC, Bonded, Potmeter Controls, Buzzer
Buzzer-Potmeter-Keypad
MMD-xxx-xxBx MMD-xxx-xxAx
For a full overview, please review our typenumber sheet found on our website:
http://www.hatteland-display.com/pdflink/ind100780-1.php
T E S T I N G / A P P R O V A L S
IEC 60945 4th (EN 60945:2002)
ABS - American Bureau of Shipping
EU RO MR - Mutual Recognition
IND100129-101
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
Keypad
This product have been tested / type approved by the following classification societies:
ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd
BV - Bureau Veritas
All specifications are subject to change without prior notice!
Physical Considerations:
• 412.00 (W) x 345.00 (H) x 73.00 (D) mm
• 16.22" (W) x 13.58" (H) x 2.87" (D)
• Weight: 7 kg (approx)
Signal Terminals:
• DVI-I Signal IN
• RGB Signal IN
• RGB Signal OUT
• Multifunction
• USB I/O
• AC Power IN
• AC Power OUT
• DC Power IN
**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the
RGB input. The output is working even if the display unit is turned off, but power cable/supply must
be connected/provided.
Multifunction Cable:
Available factory standard cables, 30cm [11.81"] in length.
• VSD100692-1 : 1 x 9P D-SUB (female) - RS-232 (COM1)
• VSD100692-3 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 1 x 9P D-SUB (female) - RS-232 (COM Touch Screen)
: 3 x BNC (female) (Composite Video in)
• VSD100692-4 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 3 x BNC (female) (Composite Video in)
Customized cables are possible to support more built-in signals, like: RS-485, RS-422/
RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,
Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths
can be manufactured.
User Controls:
On front bezel - Keypad control (IP66) xxx-xxAx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (up/down - push buttons)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
On front bezel - Potmeter control (IP66) xxx-xxBx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
• Speaker / Buzzer
Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating : Protection (EN60529): IP66 front - IP20 rear
• Compass Safe Dist. : JH15T17MMD-xxx-xxxx Std: 130cm Steering: 100cm
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:
• Cables = VSD100692-3, VSD100692-4 or customized cables.
• JH 15TBR STD-B1 = Mounting Bracket (See user manual)
• JH 15TRO STD-A1 = Rotary Bracket (See user manual)
• JH 15TSV STD-A1 = Sun Visor (See user manual)
• JH 15VED STD-A1 = Vesa Bracket (See user manual)
• JH 15TAP STD-A1 = 15" Adapter Frame to 19" Rack (See user manual)
• JH 15TAP STD-B1 = 15" Adapter Frame to 17" CRT cut out (See manual)
• JH 15TWC STD-A1= Water Cover (See user manual)
Factory Options:
• Resistive* or Capacitive Touch Screen / Optical Bonding Technology*
*Note that all 15 inch with resistive touch screens can not be combined with bonding.
& C E R T I F I C A T E S
CCS - China Classification Society
54
: 1 x 29p DVI Female (or as RGB IN with adapter)
: 1 x 15p HD D-SUB (female)
: 1 x 15p HD D-SUB (female) - Clone of RGB IN**
: 1 x 160p D-SUB (female) - Also see table below
: 1 x TYPE B Conn. (female) Reserved for future use
: 1 x Std IEC Inlet
: 1 x Std IEC Outlet (5A Max)
: 1 x 2p D-SUB Connector (male) - Amphenol FCC17
DNV - Det Norske Veritas
LRS - Lloyd's Register of Shipping
2/2