Table of Contents
Advertisement
ACCESSING:
DESCRIPTION: This is the default screen (also called the
Home screen). Once the Quantum™ HD has booted, this
screen will appear. The most important information about
the compressor and the applicable subsystems operation
is displayed here. The Operating Status screen is continu-
ously updated and provides a variety of information with
regard to the current condition and performance of the
compressor unit and subsystem This screen is divided into
fi ve sections:
HEADER - The Header area appears at the very top of
the screen and is common to all screens. Each screen
Header provides the same information, as well as a
method of accessing additional screens. The infor-
mation and access features appear here:
Normal/Warning/Shutdown Status Bar - If
either a Warning or Shutdown condition is en-
countered, it will be notifi ed with white text on
a red background in the upper left corner of the
Header, as shown on the screen above. If there
are no warnings or shutdowns, this area will dis-
play Normal in white text on a green background.
To view what Warnings or Shutdowns are active,
press the [Alarms] icon.
QUANTUM™ HD COMPRESSOR CONTROL PANEL
OPERATION
SECTION 3
OPERATING DISPLAY SCREENS
The defi nitions for the two messages are:
Warning - A message appears when a
warning is present. The message indicates
that a warning setpoint has been reached,
or exceeded, and requires operator ac-
knowledgement - but allows the compres-
sor to continue to run if it is already running.
Shutdown - A message appears when a
shutdown has occurred. The message in-
dicates that a shutdown setpoint has been
reached, or exceeded, and requires an
operator to acknowledge, and causes the
compressor to shut down.
Panel Name - If a customized panel name has
been entered for the panel, it will appear at the
very top center of the Header. To change the
Panel Name, perform the following icon selec-
tions:
Select the [Menu] icon > [Confi guration] >
[Compressor].
The Compressor screen will now be shown. In
the box that is entitled Compressor Info, is a line
called Compressor Name. To the right of Com-
090.040-O (MAR 12)
Page 15
Advertisement
Table of Contents
