ACCESSING:
DESCRIPTION: The purpose of this screen is to allow
the user to assign additional analog channels to be more
readily viewable. Since the main Operating Status screen
is capable of only showing a limited number of preas-
signed analog values, it may be desirable for the user to
have a method of viewing additional information that they
can select, on a common screen.
This screen is provided to allow the user to view up to 51
different analog channels of their choosing.
As an example of how this screen works, assume that in
addition to the data that is shown on the Operating Sta-
tus screen, the user would like to monitor the Capacity
Slide Position, Auxiliary Analog Channel 1 and Compres-
sor Vibration –Suction, all on the same screen (this one).
Notice that Capacity Slide Position is already shown on
the Operating Status screen, but the user would also like
to see Auxiliary Analog Channel 1 and Compressor Vi-
bration –Shaft Side on the same screen. In order to set
this screen up this way, the user would select the [Select
Data] button, and on the pop-up menu that appears, sim-
ply select the additional channels that you wish to view.
Once selected, a check will appear in the box to the left
of the channel selected. When fi nished, simply select the
[Save Data Points] button to exit the menu and return to
the User Defi ned screen. The changes you made will now
appear.
The following selections may be shown on this screen:
•
Auxiliary Analog #1 - #20
QUANTUM™ HD COMPRESSOR CONTROL PANEL
OPERATION
HOME
User Defi ned
User Defi ned
•
Balance Piston Pressure
•
Capacity Slide Position
•
Compressor Oil Pressure
•
Compressor Oil Temperature
•
Compressor Vibration – Discharge
•
Compressor Vibration – Suction
•
Discharge Pressure
•
Discharge Temperature
•
Economizer Pressure
•
Filter Pressure
•
Intermediate Pressure
•
Kilowatts
•
Main Oil Injection Pressure
•
Manifold Pressure
•
Motor Current
•
Motor Stator #1 - #3
•
Motor Temperature – Opposite Shaft Side
•
Motor Temperature – Shaft Side
•
Motor Vibration – Opposite Shaft Side
•
Motor Vibration – Shaft Side
•
Oil Separator Temperature
•
Process/Brine Temperature Entering
•
Process/Brine Temperature Leaving
•
RPM
•
Remote Capacity Position
•
Remote Control Setpoint
•
Suction Pressure
•
Suction Temperature
•
System Discharge Pressure
•
Volume Slide Position
090.040-O (MAR 12)
Page 19