EBARA ENR Instruction And Maintenance Manual page 16

INDEX
1.-INTRODUCTION
2.-SAFETY
2.1.- Staff training and qualification
2.2.- Handling
2.3.- Safety instructions for using on places
under risk of explosion
2.3.1.- Pump – motor sets
2.3.2.- Execution of coupling guards
2.3.3.- Checking technical items
2.3.4.- Avoiding external impacts
3.-TRANSPORTATION AND STORAGE
4.-SPECIFICATIONS
5.-OPERATION LIMITS
6.-INSTALLATION
6.1.- Location of installation
6.2.- Piping
6.3.- Centering
6.4.- Electrical installation
6.4.1.- Electrical connection
6.4.2.- Electrical maintenance
7.-OPERATION
7.1.- Before starting up the pump
7.2.- Start up
8.-MAINTENANCE
8.1.- Daily checks
8.2.- Operation cares
8.3.- Storage cares
8.4.- Replacing parts
9.-CONSTRUCTION
10.-DISASSEMBLING
11.-REPAIR AND GUARANTEE
16
1.- INTRODUCTION
Every pump is checked in our factory before deli-
vering it, so it is able to work correctly after the
electrical and hydraulic connections have been
made, following the instructions of this manual.
At the reception of the pump:
(1) Check the nameplate ratings. It is spe-cially
important to check the nominal voltage of the
pump. Also check the head value, the capa-
city, pump speed as well as the motor full load
current.
(2) Check if any damage occurred during trans-
portation, or if there is removed screw or nut.
(3) Verify if all the requested accessories, spare
and optional parts have been supplied.
We recommend that you keep this manual in a
safe place for future reference.
2.- SAFETY
This installation and service manual contains
basic instructions which must be taken into
account undertaking the installation, operation
and maintenance of the pump.
Danger warning:
Non specific
The operator / installer should read all the sec-
tions of this manual before installing and starting
up the pump. It is advisable to keep this manual
in the location in which the pump is going to
operate.
Take into account all country standards in force
relating to safety and preventive measures desig-
ned for personal protection, in addition to all
safety instructions referred to. The omission of
this safety instructions may cause personal injury
and damage to the pump.
(ENGLISH)
Danger warning:
Shock hazard