ACCESS 9340 and 9360 Meters
Chapter 3—Operation
Set Up I/Os
###:
1. Press
until I/O is visible.
2. Press I/O.
3. Press D OUT for digital output or D IN for
digital input, or press A OUT for analog
output or A IN for analog input. Use the
###:
button to scroll through these
selections.
NOTE: Analog inputs and outputs are
available only with the 9340-60-I/O2222
option module.
4. Press EDIT.
5. Select the I/O mode based on the I/O type
and the user selected mode: NORM.,
LATCH, TIMED, PULSE, or END OF.
6. Depending on the mode selected, the
meter will prompt you to enter the pulse
weight, timer, and control.
7. Press OK.
8. Select EXT. (externally controlled via
communications) or ALARM (controlled by
an alarm).
1;
9. Press
until you are asked to save your
changes.
10. Press YES to save the changes.
EN–24
© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
PMCM-9340D-0208
2/2008