Set Up The Alarm Backlight; Set Up The Bar Graph - Siemens ACCESS 9340 Reference Manual

PMCM-9340D-0208
2/2008

Set Up the Alarm Backlight

###:
1. Press until BLINK is visible.
2. Press BLINK.
3. Enter ON or OFF.
4. Press OK.
1;
5. Press until you are asked to save your
changes.
6. Press YES to save the changes.

Set Up the Bar Graph

###:
1. Press until BARGR is visible.
2. Press BARGR.
3. Press AMPS or PWR.
4. Select AUTO or MAN. If MAN is selected,
press OK and enter the %CT*PT and KW
(for PWR) or the %CT and A (for AMPS).
5. Press OK.
1;
6. Press until you are asked to save your
changes.
7. Press YES to save the changes.
© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
ACCESS 9340 and 9360 Meters
Chapter 3—Operation

  

  


EN–29