Meter Resets; Initialize The Meter - Siemens ACCESS 9340 Reference Manual

PMCM-9340D-0208
2/2008

Meter Resets

Initialize the Meter

Initializing the meter resets the energy
readings, minimum/maximum values, and
operating times. Do the following to initialize
the meter:
###:
1. Press until METER is visible.
2. Press METER.
3. Enter the password (the default is 0000).
4. Press YES to initialize the meter and to
return to the RESET MODE screen.
NOTE: We recommend initializing the meter
after you make changes to any of the
following: CTs, PTs, frequency, or system
type.
© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
To access the reset options of the meter, do the following:
1. Scroll through the Level 1 menu list until you see MAINT
(maintenance).
2. Press MAINT.
3. Press RESET.
4. Continue by following the instructions in the sections below.
ACCESS 9340 and 9360 Meters
Chapter 3—Operation

 
EN–31