PMCM-9340D-0208
2/2008
Energy-Per-Shift
Configuration
© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
The energy-per-shift feature allows the meter to group energy usage
based on three groups: 1st shift, 2nd shift, and 3rd shift. These
groups provide a quick, historical view of energy usage and energy
cost during each shift. All data is stored in nonvolatile memory.
Table 4–4: Energy-per-shift recorded values
Category
Time Scales
Energy
Energy Cost
User Configuration
The start time of each shift is configured by setting registers using the
display or by using ION Setup. The table below summarizes the
quantities needed to configure energy-per-shift using register
numbers. For ION Setup setup, refer to ION Setup Help.
ACCESS 9340 and 9360 Meters
Chapter 4—Metering Capabilities
Recorded Values
•
Today
•
Yesterday
•
This Week
•
Last Week
•
This Month
•
Last Month
•
Real
•
Apparent
•
Today
•
Yesterday
•
This Week
•
Last Week
•
This Month
•
Last Month
•
Meter Reading Date
•
Meter Reading Time of Day
•
1st Day of the Week
EN–55