Siemens ACCESS 9340 Reference Manual page 99

PMCM-9340D-0208
2/2008
Table 7–2: List of Default Disturbance Alarms by Alarm Number
Alarm
Alarm Description
Number
Disturbance Monitoring (1/2 Cycle) (9360DC)
41 Voltage Swell A
42 Voltage Swell B
43 Voltage Swell C
44 Voltage Swell A–B
45 Voltage Swell B–C
46 Voltage Swell C–A
47 Voltage Sag A–N
48 Voltage Sag B–N
49 Voltage Sag C–N
50 Voltage Sag A–B
51 Voltage Sag B–C
52 Voltage Sag C–A
➀
Scale groups are described in Table 6–2 on page 80.
➁
Alarm types are described in Table 7–3 on page 92.
© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
NOTE: Current sag and swell alarms are enabled using WinPM.Net
or by setting up custom alarms. To do this, delete any of the above
default disturbance alarms, and then create a new current sag or
swell alarm (see the example under the "Custom" alarm group on
page 88.). Sag and swell alarms are available for all channels.
Abbreviated Test
Display Name Register
Swell Van
Swell Vbn
Swell Vcn
Swell Vab
Swell Vbc
Swell Vca
Sag Van
Sag Vbn
Sag Vcn
Sag Vab
Sag Vbc
Sag Vca
ACCESS 9340 and 9360 Meters
Chapter 7—Advanced Alarms
Scale
Units ➀
Group
Volts D
Volts D
Volts D
Volts D
Volts D
Volts D
Volts D
Volts D
Volts D
Volts D
Volts D
Volts D
Alarm
➁
Type
080
080
080
080
080
080
080
080
080
080
080
080
EN–91