ACCESS 9340 and 9360 Meters
Chapter 1—Introduction
Topics Not Covered in This Manual
EN–2
Some of the meter's advanced features, such as onboard data logs
and alarm log files, can only be set up over the communications link
using ION setup or WinPM.Net from Siemens. This meter instruction
bulletin describes these advanced features, but does not explain how
to set them up. For instructions on using ION setup or WinPM.Net,
refer to the appropriate online help, User Guide, or Commissioning
Guide.
NOTE: The ACCESS 9340/9360 Meter is supported only by ION
setup 2.1 SP1 or higher and WinPM.Net 3.2 SP1 or higher.
© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
PMCM-9340D-0208
2/2008