Testing Wrist Strap Grounding Cords Rlcm-Edc - Nortel DMS-100 Series Maintenance Manual

11-12 11-12 Routine maintenance procedures
Testing wrist strap grounding cords Testing wrist strap grounding cords
RLCM-EDC RLCM-EDC
Application
Use this procedure to verify the correct resistance of the wrist strap
grounding cords. This resistance must be low enough for static electricity to
discharge from a person. This resistance must be high enough to prevent
electrocution if the equipment develops a short-circuit while a person wears
a wrist strap.
Interval
Perform this procedure every month.
Common procedures
There are no common procedures.
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the
procedure.
297-8381-550 Standard 02.02 April 1999
11-12