Nortel DMS-100 Series Maintenance Manual page 306

6-118 RLCM-EDC card replacement procedures
NT6X74
in RMM
(continued)
19
20
21
22
23
24
25
26
297-8381-550 Standard 02.02 April 1999
To list the IOC file names into your user directory, type
>LISTVOL volume_name ALL
and press the Enter key.
where
volume_name is the name of the volume that contains the PM load files you
obtain in step 17.
To leave the disk utility, type
>QUIT
and press the Enter key.
Proceed to step 27.
From office records, determine and note the number of the system load module
(SLM) disk. Determine the name of the volume that contains the PM load files.
To access the disk utility level of the MAP, type
>DISKUT
and press the Enter key.
To list all disk volumes to user directory, type
>LV CM
and press the enter key.
To list the SLM file names into your user directory, type
>LF volume_name
and press the Enter key.
where
volume_name is the name of the volume that contains the PM load files you
obtain in step 22
To leave the disk utility, type
>QUIT
and press the Enter key.