Nortel DMS-100 Series Maintenance Manual page 193

4 To clear the trunk test position, type:
>NEXT
and press the Enter key.
Note: Repeat this command until the system clears the TTP control position.
5 Send any defective cards for repair according to local procedure.
6 Record the following items in office records:
date you replaced the card
serial number of the card
problems that prompted replacement of the card.
Go to step 8.
7 For additional help, contact the next level of support.
8 This procedure is complete.
RLCM-EDC card replacement procedures 6-5
DMS-100 Family Maintenance Manual ABSK007
NT0X10 NT0X10
in RMM RMM
(continued) (end)