Nortel DMS-100 Series Maintenance Manual page 35

Example of MAP response
LCM REM1 01 0
The ALL option is used to execute the command on a set of posted LCMs.
The set may include LCMs of different types (64K, 256K, 4M). The
command however executes only on 4M LCMs.
>SWLD UNIT 0 ALL
Example of MAP response
This operation will be performed on 2 LCMs.
This operation will not be performed on 1 LCM.
Please confirm ("YES","Y","NO","N"):.
Y.
LCM REM1 01 0 Unit 0 SWLD Passed
LCM REM2 01 0 Unit 0 SWLD Passed
Summary:
2 Passed.
1 Unaffected..
When option NOWAIT is used, the prompt is returned to operating company
personnel while continuing to execute the command on the posted LCM.
>SWLD UNIT 0 NOWAIT
Example of MAP response
Existing loads: Unit 0: Act:REDC01AA
New loads after a successful SWLD will be:
Unit 0: Act:REDC02AB
Please confirm ("YES","Y","NO","N"):.
Y.
LCM REM1 01 0 Unit 0 Request Submitted.
Unit 1 Request Invalid
Mate unit must be either InSv or ISTb
Stby:REDC01AA
DMS-100 Family Maintenance Manual ABSK007
Maintenance overview 1-23
Stby:REDC02AB