Using Virtual Front Panel - Keysight M9290A Getting Started And Troubleshooting Manual

Hide thumbs Also See for M9290A:

Table of Contents

Running Modular SA application

Using Virtual Front Panel

The CXA-m Virtual Front Panel is a software equivalent of the key set, which

provides the control access to instrument. In CXA-m, there are two Virtual Panel

mode: Attached mode and Floating mode. The attached mode of Virtual Panel is

shown as below.

In "Attached" mode, the Virtual Front Panel attaches to the main application

window. When you move, resize, or minimize the main application window, the

Virtual Front Panel window will be moved, resized, or minimized at the same time.

When you maximize the main application window, the Virtual Front Panel will be

changed to "Floating" mode automatically. The operations to Virtual Front Panel

window, such as resizing, minimizing and maximizing, will not affect the main

application window. Virtual Front Panel window cannot be moved separately in

"Attached" mode.

You can also change Virtual Front Panel from "Attached" mode to "Floating" mode

manually by clicking "Floating" option at the lower right corner of the Virtual Front

Panel window. By clicking the "Attached" option, it can return to the "Attached"

mode once more.

Table of Contents