Table of Contents
Advertisement
Software Installation and Licensing
Software Installation
7. InstallShield Wizard is ready to begin installation, click "Install" to install
8. The installation process will be shown as below:
NOTE
During installation process, some prompt boxes and windows will be popped up. If any FPGA
version on installed module is different with the version required by current Modular SA, FPGA on
that module will be updated during the installation process. If FGPA is updated by installation
process, please power off the chassis and then power on to make the FPGA update take effects.
NOTE
If the installation is failed, a window will pop up with possible root causes information. Please
check the message and follow the instruction to recover the installation accordingly.
24
X-Series Modular Signal Analyzer Application:
Advertisement
Table of Contents
